JDB夺宝电子|JDB电子游戏网站,官网,官方网站,官方网址

产品详情
  • 产品名称:TESTING 产品目录

  • 产品型号:T
  • 产品厂商:斯洛文尼亚TESTING
  • 产品价格:0
  • 折扣价格:0
  • 产品文档:
你添加了1件商品 查看购物车
简单介绍:
TESTING产品目录,提供如下标准的的配套仪器IEC60065/2001 7TH EDITION、IEC60238(2004)、IEC60335-1/2004IEC60400ED6.1 (2002)、IEC60529(GB4208)、IEC60598-1/2003、IEC60669-1:1998、IEC60884-1/2002、IEC60950-1/2005、IEC61058-1(2001)
详情介绍:
TESTING 产品目录
CAT. NO.DESCRIPTIONIMAGE
2094MIMULTITESTER 
DV-20WATER DISTILLER (20l/h) 
DV-8WATER DISTILLER (8l/h) 
KK-3500CLIMATIC CHAMBER 3552 L (1200x1600x1850 mm), 10°C to + 70 °C, RH 30 to 95 % 
KK1000CLIMATIC CHAMBER 1000 L, 5°C to + 95 °C, RH 15 to 95 % 
KK1000 CHLCLIMATIC CHAMBER 1000 L (1000x1000x1000 mm), -30°C to + 100 °C, RH 10 to 95 % 
KK1000 CHLTCLIMATIC CHAMBER 1000 L (1000x1000x1000 mm), -75°C to + 180 °C, RH 10 to 98 % 
KK1000CHCLIMATIC CHAMBER 1000 L (1000x1000x1000 mm), -45 °C to 120 °C, RH 15 to 97 % 
KK105CLIMATIC CHAMBER 105 L, 5°C to + 95 °C, RH 15 to 95 % 
KK1440CHCLIMATIC CHAMBER 1440 L (1000x1200x1200 mm), 10°C to + 180 °C, RH 10 to 95 % 
KK190CLIMATIC CHAMBER 190 L, 5°C to + 95 °C, RH 15 to 95 % 
KK190LTCLIMATIC CHAMBER 190 L, EXTENDED TEMP RANGE, -75°C to + 180 °C, RH 15 to 95 % 
KK2000CHCLIMATIC CHAMBER 2000 L (1050 x 1200 x 1600 mm), -40°C to + 150 °C, RH 10 to 98 % 
KK265CLIMATIC CHAMBER 252 L, 5°C to + 95 °C, RH 15 to 95 % 
KK4075CLIMATIC CHAMBER 4075 L, 5°C to + 95 °C, RH 15 to 95 % 
KK500CLIMATIC CHAMBER 495 L, 5°C to + 95 °C, RH 15 to 95 % 
KK600LTEMPERATURE AND HUMIDITY CHAMBER 612 L, T= -40..90 deg C, % RH 10..95% 
KKXX CLIMATIC CHAMBERS kk1000.jpg
OB-7/2CALIBRATION BATH 7L (TCW +8°C to 250°C +/- 0,02 °C, ID100 mm x 230 mm) 
OB-7/2HCALIBRATION BATH 7L (TCW -40°C to 130°C +/- 0,02 °C, ID100 mm x 230 mm) 
SP105HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 105 L 
SP105CHEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 105 L 
SP1200CKTEMPERATURE CHAMBER 1200 l , 0°C to 300 °C 
SP120EHEATING CHAMBER WITH FORCED CONVECTION - EASY Ta+5 to 300 deg.C 120 L 
SP1300CHEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 1288 L 
SP160HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 163 L 
SP160CHEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 163 L 
SP190HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 190 L 
SP190CHEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 190 L 
SP210HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 210 L 
SP210CHEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 210 L 
SP240EHEATING CHAMBER WITH FORCED CONVECTION - EASY Ta+5 to 300 deg.C 240 L 
SP250HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 250 L 
SP250CHEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 250 L 
SP25EHEATING CHAMBER WITH FORCED CONVECTION - EASY Ta+5 to 300 deg.C 25 L 
SP265HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 264 L 
SP265CHEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 264 L 
SP440HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 440 L 
SP440CHEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 440 L 
SP45HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 44 L 
SP45CHEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 44 L 
SP55EHEATING CHAMBER WITH FORCED CONVECTION - EASY Ta+5 to 300 deg.C 55 L 
SP910CHEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 910 L 
SPXXE HEATING CHAMBERS WITH FORCED CONVECTION - EASY sp55.jpg
T1-02HEATING DEVICE 
T1-04HEATING DEVICE CONTROLLER 
T1-11FUME CUPBOARD (PROTECTIVE CABINET, TEST CHAMBER) 850 l 
T1-12FUME CUPBOARD (PROTECTIVE CABINET) 1000 x 1000 x 1500 mm 
T1-13DUST CHAMBER 3 m3 
T1-14 FUME CUPBOARD 0,5 m3 t1_14.jpg
T1-15DUST CHAMBER 800x800x900 mm 
T1-16DUST CHAMBER 2000x1000x1000 mm 
T1-17DUST CHAMBER 1000x1000x1000 mm 
T1-18DUST CHAMBER 1400x700x700 mm 
T1-19DRIP BOX 700 x 700 mm 
T1-20DRIP BOX 500 x 500 mm 
T1-21DRIP BOX 500 x 1000 mm 
T1-23WATER SUPPLY UNIT FOR DRIP BOX 
T1-25TURNTABLE FOR DRIP BOX 
T1-26TUBE FOR SPRAY APPARATUS, R 200, ?60, ?90° 
T1-27TUBE FOR SPRAY APPARATUS, R 400, ?60, ?90° 
T1-28TUBE FOR SPRAY APPARATUS R 600 ?60,?90° 
T1-29TUBE FOR SPRAY APPARATUS, R 800, ?60, ?90° 
T1-30TUBE FOR SPRAY APPARATUS, R 1000, ?60, ?90° 
T1-32 MOTOR DRIVE FOR SPRAY APPARATUS ip_lab_ipx3_ipx4.jpg
T1-35TELESCOPE SUPPORT 270x180 
T1-36SPRAY NOZZLE 
T1-37WALL ELECTROLIFT FOR DRIP BOX 
T1-40WALL CARRIER FOR DRIP BOX (700x700) (h=4000mm) 
T1-41WATER JET HOSE NOZZLE DIA. 6,3 mm 
T1-42WATER JET HOSE NOZZLE DIA. 12,5 mm 
T1-43SPLASH NOZZLE (IEC 60335-2-64, 60335-2-58, Fig. 101) 
T1-45JET TEST SET 
T1-51 DUST CHAMBER WxDxH 700X1100x600 mm t1_51.jpg
T1-55DRAUGHT - PROOF ENCLOSURE FOR LUMINARIES 2x2x2 m (IEC 60598-1, Annex D) 
T1-56DRAUGHT - PROOF ENCLOSURE FOR LUMINARIES 2,5x1,8x3 m (IEC 60598-1, Annex D) 
T1-59TEST ENCLOSURE FOR MEASUREMENT OF SMOKE DENSITY OF CABLES 3x3x3m (IEC 61034-1) 
T1-60APPARATUS FOR HEATING TEST WITH 4 - 10 A FLUSH-MOUNTED APPLIANCE INLETS C16 (INSUL. SHROUD) 
T1-61APP. FOR HEATING TEST WITH 4 - 10 A FLUSH-MOUNTED APPLIANCE INLETS C16A (INSUL. SHROUD) 
T1-62APP. FOR HEATING TEST WITH 4 - 16 A SURFACE-MOUNTED APPLIANCE INLETS C22 (METAL SHROUD) 
T1-63POWER REGULATOR FOR T1-65 
T1-65WATER EVAPORATION APPARATUS FOR REFRIGERATORS (IEC 60335-2-24, Fig. BB.1) 
T1-66WATER SPILLAGE APPARATUS FOR REFRIGERATORS (IEC 60335-2-24, Fig. 101) 
T1-71TUBE FOR SPRAY APPARATUS, R 1200, ?60, ?90° 
T1-75CPROGRAMMABLE WALK IN CHAMBER 3x3x3m t - 40 °C to + 90 °C , 15% to 95% RH 
T1-76PLYWOOD TEST CABINET 500 × 500 × 500 mm (IEC 60400 Cl. 17.1) 
T1-77CHAMBER FOR WATER TESTS IPX1-4 WITH DRIP BOX (500x500mm), OSCILLATING TUBE (R200) AND TURNTABLE 
T1-77AWATER DISTILLER WITH PUMP FOR CLEANING THE T1-77 AFTER TESTING 
T1-77BSYSTEM FOR WATER RECYCLING OF T1-77 
T1-78HEATING ENCLOSURE FOR THERMALLY PROTECTED BALLASTS (IEC 61347-1) 
T1-79TEST CHAMBER FOR MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS 3x3x3m (IEC 61034-1, 60331-11) 
T2-01TUMBLING BARREL h=350mm 
T2-02TUMBLING BARREL h=500 mm 
T2-04TUMBLING BARREL 
T2-04ABARREL OF T2-04 
T2-06PENDULUM IMPACT TEST APPARATUS - MECHANISM 
T2-07MOUNTING DEVICE FOR IMPACT TEST m 10kg, 175 x 175 
T2-08MOUNTING DEVICE FOR IMPACT TEST DIA. 175 
T2-10BRAKE FOR T2-11 WITH FASTENING DEVICE 
T2-100DEVICE FOR CHECKING THE FIXATION OF PLUG PINS (VDE 0620-1 F. 31) 
T2-101DEVICE FOR CHECKING THE FIXATION OF PLUG PINS (VDE 0620-1 F. 31) 
T2-102DEVICE FOR CHECKING THE SIDE EARTHING CONTACTS (VDE 0620-1 F. 43) 
T2-103G13 MOUNTING JIG FOR THE TESTING OF LAMPHOLDERS (IEC 60400, Fig. 1) 
T2-104TOOL FOR VERIFICATION OF MAXIMUM WITHDRAWAL FORCE (NEN 1020) 
T2-105TOOL FOR VERIFICATION OF MINIMUM WITHDRAWAL FORCE (NEN 1020) 
T2-11TORSION APPARATUS 4 Nm 
T2-12BENDING APPARATUS FOR LAMPHOLDERS (IEC 60238 Fig. 12) 
T2-13DEVICE FOR WITHDRAWAL FORCE MEASURING 
T2-14APPARATUS FOR VERIFICATION OF MAXIMUM WITHDRAWAL FORCE 
T2-15PRESSURE APPARATUS (IEC 60238, Fig. 9) 
T2-16APPARATUS FOR PRESSURE TEST ON SHROUDS (IEC 60320-1, F. 20) 
T2-17APPARATUS FOR PULLING TEST (IEC 60320-1, F. 19) 
T2-18APP. FOR TESTING THE CORD RETENTION 
T2-19IMPACT APP. FOR GRIPPING LUGS 
T2-20APPARATUS FOR TESTING CORD RETENTION (IEC 60884-1, Fig. 20) 
T2-21IMPACT WEIGHT APPARATUS 
T2-22INTERMEDIATE PE FOR T2-21 FOR LOW TEMP. TEST 
T2-23INTERMEDIATE PE FOR T2-21 FOR PIN INSULATING SLEEVES 
T2-25SLIDING WEIGHT 100 g FOR T2-21 
T2-28SLIDING WEIGHT 250 g FOR T2-21 
T2-34SLIDING WEIGHT 1000 g FOR T2-21 
T2-40AXIAL PULL TEST APPARATUS (IEC 60127-2, Fig. 7) 
T2-41TEST FUSE BASE I max.10A (IEC 60127-2, Fig. 1) 
T2-42TEST FUSE BASE I > 10A (IEC 60127-2, Fig. 2) 
T2-43TEST FUSE BASE FOR BREAKING CAPACITY (IEC 60127-2, Fig. 3) 
T2-44MECHANICAL SHOCK TEST APPARATUS (IEC 60898-1) 
T2-45BUMP TEST APPARATUS 1000 x 600 mm, IEC 60065 
T2-46PENDULUM IMPACT - TEST APPARATUS-POLYAMIDE HAMMER 150g 
T2-47PENDULUM IMPACT-TEST APPARATUS-STEEL HAMMER 150g 
T2-48PENDULUM IMPACT-TEST APPARATUS-STEEL HAMMER 250g 
T2-49PENDULUM IMPACT-TEST APPARATUS-STEEL HAMMER 500g 
T2-50PENDULUM IMPACT-TEST APPARATUS-STEEL HAMMER 1500g 
T2-51PENDULUM IMPACT-TEST APPARATUS-STEEL HAMMER 5000g 
T2-52MOUNTING BLOCK FOR FLUSH TYPE EQUIPMENT 
T2-53TRIGGER FOR HAMMERS T2-49, T2-50 and T2-51 
T2-54TORSION APPARATUS 20 Nm 
T2-58TORSION APPARATUS 0.5 Nm (IEC 60335-1, 60950-1) 
T2-59ARRANGEMENT FOR MECHANICAL STRENGTH TEST ON MULTIPLE PORTABLE SOCKET-OUTLETS (IEC 60884-1, BS 1363-2) 
T2-60PENDULUM IMPACT-TEST APPARATUS-POLYAMIDE HAMMER 250g 
T2-63TUMBLING BARREL h=500 mm (IEC60068-2-32) 
T2-64ARRANGEMENT FOR COMPRESSION TEST OF 24.5 (150 N, 300 N) (IEC 60884-1, FIG. 8, Cl. 10.1) 
T2-65APPARATUS FOR TESTING SCREW-TYPE TERMINALS (IEC 60884-1, Fig. 11) 
T2-66APPARATUS FOR TESTING DURABILITY OF MARKINGS ON RATING LABELS 
T2-69ARRANGEMENT FOR CHECKING DAMAGE TO CONDUCTORS (IEC 60884-1, Fig. 11) 
T2-70INCLINED PLANE 1000 x 1000 mm 
T2-71TILTED SUPPORT FOR IPX2 TEST 500 x 500 
T2-72APPARATUS FOR WINDING A FLEXIBLE PIPE 
T2-73APPARATUS FOR CHECKING SECURITY OF LAMPHOLDER CONTACTS 
T2-74CORD ANCHORAGE TORQUE DEVICE 
T2-76DEVICE FOR MEASURING THE CONTACT PRESSURE OF EARTHING CONTACTS OF 10/16A 250 V TWO-POLE SOCKET-OUTLETS WITH SIDE EARTHING-CONTACTS (F. 23, CEE 7, VDE 0620-1 F. 14) 
T2-77PLUG PIN DEFLECTION TEST APPARATUS FOR RESILIENT PLUGS (BS 1363-1, Fig. 8, Cl. 12.12) 
T2-78APPARATUS FOR MECHANICAL STRENGTH TEST ON RESILIENT COVERS WITH HARDWOOD BLOCK (BS 1363-1, Cl. 9, Fig. 2a, 2b) 
T2-79APPARATUS FOR TESTS ON PLUG PINS (BS 1363-1, Fig. 32, Cl. 12.9.4) 
T2-80APPARATUS FOR TORSION TEST ON PINS (BS 1363-1, Fig. 33, Cl. 12.9.6) 
T2-81APPARATUS FOR PULL TEST ON BS PLUGS (100N, W/MOUNTING PLATE) (BS 1363-1, Fig. 7, Cl. 12.11.1) 
T2-82TOOL FOR VERIFICATION OF MAXIMUM WITHDRAWAL FORCE (SSA 444, IEC 60884-1) 
T2-83TOOL FOR VERIFICATION OF MAXIMUM WITHDRAWAL FORCE (EN 50075, IEC 60884-1) 
T2-84TOOL FOR VERIFICATION OF MAXIMUM WITHDRAWAL FORCE (DIN 49406, IEC 60884-1) 
T2-85TOOL FOR VERIFICATION OF MINIMUM WITHDRAWAL FORCE (SMALL SSA 444, IEC 60884-1) 
T2-86TOOL FOR VERIFICATION OF MINIMUM WITHDRAWAL FORCE (LARGE SSA 444, IEC 60884-1) 
T2-87TOOL FOR VERIFICATION OF MINIMUM WITHDRAWAL FORCE (DIN 49406, IEC 60884-1) 
T2-88TOOL FOR VERIFICATION OF MINIMUM WITHDRAWAL FORCE (EN 50075, IEC 60884-1) 
T2-89BUMP TEST APPARATUS 1500 x 1000 mm, 100 kg, IEC 60065 
T2-91G5 MOUNTING JIG FOR THE TESTING OF LAMPHOLDERS (IEC 60400, Fig. 1) 
T2-92FIXTURE FOR THE TESTING OF LAMPHOLDER FLEXIBILITY (IEC 60400, Fig. 3) 
T2-93TUMBLING BARREL h=500 mm (BS 1363-1, Fig. 20) 
T2-94APPARATUS FOR CHECKING THE STABILITY OF SIDE EARTHING CONTACTS (VDE 0620-1 F. 15) 
T2-95TEST PLUG 16 A (VDE 0620-1 F. 16A) 
T2-96TEST PLUG 3-PHASE 16 A (VDE 0620-1 F. 16b) 
T2-97TEST PLUG 3-PHASE 25 A (VDE 0620-1 F. 16c) 
T2-98TEST PLUG 2,5 A (VDE 0620-1 F. 16d) 
T2-99DEVICE FOR CHECKING THE FIXATION OF PLUG PINS (VDE 0620-1 F. 31) 
T3-01EARTH BOND RESISTANCE TESTER 12 (6) V a.c., I max. 33A 
T3-04APP. FOR SOCKET-OUTLETS BREAKING CAP. AND NORMAL OP. TEST 
T3-05 SURGE TEST APPARATUS t3_05.jpg
T3-06TEST CIRCUIT A FOR SWITCHES 
T3-07TEST CIRCUIT FOR SWITCHES 200 A 
T3-08TEST CIRCUIT FOR SWITCHES 80 A 
T3-09TEST CIRCUIT FOR SWITCHES 
T3-10APPARATUS FOR CIRCULAR AND ANGULAR MOVEMENTS 
T3-12APPARATUS FOR NORMAL OPERATION TEST OF LAMPHOLDERS (FOR USE WITH T3-10) 
T3-13CABLE FLEXING APPARATUS 
T3-15APPARATUS FOR AUTOMATIC REEL CORD TESTING 
T3-20APPARATUS FOR FLEXING TEST (IEC 60884-1, BS 1343-1) 
T3-25APP. FOR BREAKING CAPACITY AND NORMAL OPERATION TESTS (IEC 320) 
T3-26APP. FOR BREAKING CAPACITY AND NORMAL OPERATION TESTS (DOUBLE SIDED, IEC 320) 
T3-27APP. FOR SOCKET-OUTLETS BREAK. CAP. AND NORMAL OP. TEST (DOUBLE SIDED, IEC 884-1) 
T3-30ADDITIONAL PARTS FOR T3-10 FOR TOASTERS FLEXING TEST 
T3-44PROBE FOR MEASURING SURFACE TEMPERATURE (IEC 60335-2-6) 
T3-53 TIMER WITH THERMOMETER t3_53.jpg
T3-53ATHERMOCOUPLE WITH THE COPPER BLOCK Dia. 4 mm (IEC 60695-11-5, 60335-1, 60959-1) 
T3-53BTHERMOCOUPLE WITH THE COPPER BLOCK Dia. 9 mm (IEC 60695-11-3, ASTM D 5027) 
T3-53CTHERMOCOUPLE WITH THE COPPER BLOCK Dia. 5,5 mm (IEC/TS 60695-11-4, ASTM D 5027) 
T3-54AFLAME HEIGHT GAUGE (IEC 60695-11-5, 60335-1, 60959-1) 
T3-54BFLAME HEIGHT GAUGE (IEC/TS 60695-11-3) 
T3-54CFLAME HEIGHT GAUGE (IEC/TS 60695-11-4) 
T3-54DCLEARANCE GAUGE (IEC/TS 60695-11-4) 
T3-61 IMPULSE GENERATOR 1,2/50 µs, 12 kV t3_61.jpg
T3-62IMPULSE GENERATOR 10/700 ?s, 6 kV (IEC 60950, 61180-1, 61180-2) 
T3-64APPARATUS FOR NORMAL OPERATION TESTS OF SOCKET OUTLETS (BS 1363-2, Cl. 18) 
T4-03 BALL PRESSURE TEST APPARATUS t4_03a.jpg
T4-04DEVICE FOR TESTING NON-SOLID PINS 100 N 
T4-07GLOW WIRE TEST APPARATUS 
T4-07ATHERMOCOUPLE FOR GLOW WIRE TEST APPARATUS 
T4-07BWIRE LOOP FOR GLOW WIRE TEST APPARATUS 
T4-07TTIMER FOR GLOW WIRE TEST APPARATUS 
T4-08 GLOW WIRE TEST APPARATUS t4_08.jpg
T4-08ATHERMOCOUPLE DIA. 0,5 mm FOR GLOW WIRE TEST APPARATUS 
T4-08BWIRE LOOP FOR GLOW WIRE TEST APPARATUS (FOR THERMOCOUPLE DIA. 0,5 mm) 
T4-08DSILVER FOIL 2 mm2 - 20 pcs. 
T4-08ETHERMOCOUPLE DIA. 1 mm FOR GLOW WIRE TEST APPARATUS 
T4-08FWIRE LOOP FOR GLOW WIRE TEST APPARATUS (FOR THERMOCOUPLE DIA. 1 mm) 
T4-08GWIRE LOOP FOR GLOW WIRE TEST APPARATUS (STRAIGHT FOR THERMOCOUPLE DIA. 0,5 mm) 
T4-08HWIRE LOOP FOR GLOW WIRE TEST APPARATUS (STRAIGHT FOR THERMOCOUPLE DIA. 1 mm) 
T4-09SOLDERABILITY TEST APPARATUS (IEC 60068-2-20/Test T: Test Ta Method 1, Test Tb Method 1A, 1B) 
T4-10HIGH FREQUENCY SPARK GENERATOR 
T4-18APP. FOR PLUG PIN ABRASION (IEC 60884-1, BS 1363-1) 
T4-19APPARATUS FOR COMPRESSION TEST FOR THE VERIFICATION OF RESISTANCE TO HEAT 
T4-20ABRASION APPARATUS 
T4-22 POWER SUPPLY 12 kV DC, 2 mA t4_22.jpg
T4-29 APPARATUS FOR PRESSURE TEST AT HIGH TEMPERATURE t4_29.jpg
T4-31NEEDLE FLAME BURNER DIA. 0.5 mm (IEC 60695-11-5) 
T4-33BUNSEN BURNER 
T4-34BUNSEN BURNER FISH TAIL 
T4-36MECHANISMUS FOR BURNING TESTS (VERT. AND HORIZ.) 
T4-37NEEDLE FLAME TESTER 
T4-38BURNER TEST SET 
T4-40POWER SUPPLY FOR T4-53 
T4-41 TRACKING TEST APPARATUS 600V t4_41.jpg
T4-41AELECTRODES FOR TRACKING TEST APPARATUS (PAIR) 
T4-41CNOZZLE FOR TRACKING TEST APPARATUS 
T4-41DDISTANCE GAUGE FOR TRACKING TEST APPARATUS 
T4-41EAMMONIUM CHLORIDE SOLUTION 1 l 
T4-41FCALIBRATED WEIGHTS M1 IN WOODEN BOXES, 1 g and 100 g WITH CERTIFICATES 
T4-42TRACKING TEST APPARATUS (1000V) 
T4-47APPARATUS FOR HIGH CURRENT ARCHING 
T4-50ELECTRODE ARRANGEMENT 65 
T4-52APPARATUS FOR HIGH-VOLTAGE LOW-CURRENT ARCHING 
T4-53TEST FIXTURE FOR HOT WIRE COIL IGNITABILITY TEST (IEC 60695-2-20, Fig. 3, IEC 60950-1) 
T4-54WINDING DEVICE FOR HOT WIRE COIL IGNITABILITY TEST (IEC 60695-2-20, Fig. 4, IEC 60950-1) 
T4-55NiCr WIRE 80/20, DIA. 0.5 mm, 100 m FOR HOT WIRE IGNITION TEST (IEC 60695-2-20, IEC 60950-1) 
T4-56ELECTRODE ARRANGEMENT for EN 50 028 
T4-57MANDREL TEST APPARATUS (IEC 60950-1, Annex AA) 
T4-58APPARATUS FOR SCRATCHING COOLING SYSTEMS (IEC 60335-2-24, Fig. 102) 
T4-59APPARATUS FOR TESTING RESISTANCE TO FLEXING AND ABRASION OF HOSES (IEC 60335-2-2, Fig. 101 and 102) 
T4-61BURNER 1000W (IEC 60695-11-2) 
T4-62GAS AND AIR SUPPLY UNIT FOR T4-61 (FLOWMETERS ?2%) 
T4-63GAS AND AIR SUPPLY UNIT FOR T4-61 (FLOWMETERS ?4%) 
T4-64METALLIC SCREEN WITH BURNER STAND (IEC 60332-1) 
T4-65BURNER 50, 500 W (IEC 60695-11-4 A, IEC 60695-11-3 A) 
T4-66GAS SUPPLY UNIT FOR T4-65 and T4-70 (ISO 9772, IEC 60695-11-3, 500W, FLOWMETER ?2%, VALVE AND MANOMETER) 
T4-67GAS SUPPLY UNIT FOR T4-65 (IEC 60695-11-4, 50W, FLOWMETER ?2%, VALVE AND MANOMETER) 
T4-69APPARATUS FOR PRESSURE TEST (BS 1363-1, Fig. 23) 
T4-70WING TOP BURNER (ISO 9772) 
T4-70AWING TOP FOR T4-70 (ISO 9772) - spare part 
T4-71SUPPORT GAUZE HOLDER (ISO 9772) 
T4-72BURNER WITH VENTURI MIXER FOR BURNING CABLES 500 mm (IEC 60331-11) 
T4-73GAS SUPPLY UNIT FOR T4-72, T4-61 (IEC 60331-11, IEC 60695-11-2, WITH MASS FLOWMETERS) 
T4-74CABLE SUPPORTING ARRANGEMENT (IEC 60331-11) 
T5-00GAUGE MAINTENANCE KIT 
T5-08TEST CORNER 800 x 800 x 1200 mm, 480 THERMOCOUPLES 
T5-101GAUGE FOR HOLES FOR BACKPLATE LAMPHOLDERS SCREWS (IEC 60238, Fig. 3) 
T5-102E14 TEST CAP FOR NORMAL OPERATION TEST (IEC 60238, Fig. 5) 
T5-103E27 TEST CAP FOR NORMAL OPERATION TEST (IEC 60238, Fig. 5) 
T5-104E40 TEST CAP FOR NORMAL OPERATION TEST (IEC 60238, Fig. 5) 
T5-105E27 GAUGE FOR DETECTING SIDE-CONTACTS WITH CUTTING-EDGES (7006-22B-1) 
T5-106E27 GAUGE FOR TESTING PROTECTION AGAINST BULB-NECK DAMAGE AND FOR TESTING CONTACT-MAKING IN LAMPHOLDERS (7006-21-5) 
T5-11E14 TEST CAP FOR TORQUE TESTS 
T5-110E14 PLUG GAUGE FOR LAMPHOLDERS FOR TESTING CONTACT MAKING (7006-30-2) 
T5-111E12 PLUG GAUGE FOR TESTING CONTACT MAKING (7006-25C-1) 
T5-112E12 "NOT GO" PLUG GAUGE (7006-26B-1) 
T5-113E12 "GO" PLUG GAUGE (7006-32A-1) 
T5-114TEST PROBE "a" DIA. 12, EN 50144-2-5, IEC 60745-2-5 
T5-115E14 PLUG GAUGE FOR LAMPHOLDERS WITH CANDLE SHAPED SHAFT FOR CANDLE LAMPS FOR TESTING CONTACT MAKING (7006-30A-1) 
T5-116SMALL TEST FINGER - test probe 19 
T5-117TEST ROD DIA. 8 X 230 mm (IEC 60335-2-14 cl. 20.102) 
T5-118TEST PIN DIA. 3 x 100 mm 
T5-119GAUGE FOR THE VERIFICATION OF THE OUTLINE OF COVERS OR COVER-PLATES 
T5-12E27 TEST CAP FOR TORQUE TESTS 
T5-120CYLINDRICAL STEEL ROD, DIA. 3 mm (IEC 60884-1, Cl. 24) 
T5-122"NOT GO" GAUGE FOR E12 CAPS ON FINISHED LAMPS 7006-28C-1 
T5-123ALIGNMENT GAUGE FOR FUSE 5 x 20 mm (IEC 60127-2, Fig. 4) 
T5-124ALIGNMENT GAUGE FOR FUSE 6.3 x 32 mm (IEC 60127-2, Fig. 4) 
T5-125MAX. GAUGE FOR FUSES 5 x 20 mm 
T5-126MIN. GAUGE FOR FUSES 5 x 20 mm 
T5-127MAX. GAUGE FOR FUSES 6.3 x 32 mm 
T5-128MIN. GAUGE FOR FUSES 6.3 x 32 mm 
T5-129SOLID LINK FOR TEST ON FUSE CLIPS (BS 1363-1, Fig. 19, Cl. 20) 
T5-13E40 TEST CAP FOR TORQUE TESTS 
T5-130ELECTRICAL INDICATOR 
T5-131DEVICE FOR CHECKING THE RESISTANCE TO LATERAL STRAIN OF 10/16A 250 V TWO-POLE FIXED SOCKET OUTLETS (IEC 60884-1, CEE 7) 
T5-132GY6.35 GAUGE FOR CHECKING MIN. RETENTION FORCE OF CONTACTS IN LAMPHOLDERS (7006-59D-2) 
T5-133G6.35, GX6.35 & GY6.35 "GO" GAUGE FOR LAMPHOLDERS 15 (7006-61B-4) 
T5-134G6.35 & GX6.35 GAUGE FOR CHECKING MIN. RETENTION FORCE OF CONTACTS IN LAMPHOLDERS (7006-61C-4) 
T5-135GX5.3 & GU5.3 SINGLE PIN GAUGE FOR CHECKING CONTACT MAKING IN LAMPHOLDERS (7006-73G-2) 
T5-136GX5.3 GAUGE FOR CHECKING MAX. WITHDRAWAL FORCE OF CONTACTS IN LAMPHOLDERS (7006-73F-2) 
T5-138ADDITIONAL "GO" GAUGE FOR E12 CAPS ON FINISHED LAMPS 7006-27J-1 
T5-139"GO" GAUGE FOR E12 CAPS ON FINISHED LAMPS (7006-27H-1) 
T5-14E14 MANDREL FOR BENDING TEST (IEC 60238 Fig. 12) 
T5-146GAUGE FOR FINISHED LAMPS FITTED WITH E40 CAPS FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT (7006-53-1) 
T5-147GAUGE FOR FINISHED LAMPS FITTED WITH E40 CAPS FOR TESTING CONTACT MAKING (7006-52-1) 
T5-148"NOT GO" GAUGE FOR CAPS ON FINISHED LAMPS E40 (7006-28D-1) 
T5-149"GO" GAUGE FOR CAPS ON FINISHED LAMPS E40 (7006-27-7) 
T5-15E27 MANDREL FOR BENDING TEST (IEC 60238 Fig. 12) 
T5-150E27 GAUGE "GO" C13A 
T5-151E27 GAUGE "NOT GO" C13E 
T5-152E33 GAUGE "GO" C13B 
T5-153E33 GAUGE "NOT GO" C13F 
T5-154R1? GAUGE "GO" C13C 
T5-155R1? GAUGE "NOT GO" C13G 
T5-156R2 GAUGE "GO" C13D 
T5-157R2 GAUGE "NOT GO" C13H 
T5-158E27 GAUGE "GO" C14A 
T5-159E27 GAUGE "NOT GO" C14E 
T5-16E40 MANDREL FOR BENDING TEST (IEC 60238 Fig. 12) 
T5-160E33 GAUGE "GO" C14B 
T5-161E33 GAUGE "NOT GO" C14F 
T5-162R1? GAUGE "GO" C14C 
T5-163R1? GAUGE "NOT GO" C14G 
T5-164R2 GAUGE "GO" C14D 
T5-165R2 GAUGE "NOT GO" C14H 
T5-166E10 TEST CAP FOR TORQUE TESTS 
T5-167E26 TEST CAP FOR TORQUE TESTS 
T5-168E27 GAUGE FOR TESTING CONTACT MAKING AND PROT. AGAINST ACC. CON. DURING INSERTION (7006-22A-5) 
T5-169E14 GAUGE FOR TESTING CONTACT MAKING AND PROT. AGAINST ACC. CON. DURING INSERTION (7006-31-5) 
T5-17PUSH-PULL DYNAMOMETER 20N 
T5-170W3/16 GAUGE "GO" C15A 
T5-171W3/16 GAUGE "NOT GO" C15B 
T5-172W3/16 GAUGE "GO" C15C 
T5-173W3/16 GAUGE "NOT GO" C15D 
T5-175D II. GAUGE C16A 
T5-176D III. GAUGE C16B 
T5-177D IV.H GAUGE C16C 
T5-178D V.H GAUGE C16D 
T5-18PUSH-PULL DYNAMOMETER 50N 
T5-180D II. GAUGE C17A 
T5-181D III. GAUGE C17B 
T5-182D IV.H GAUGE C17C 
T5-183D V.H GAUGE C17D 
T5-185DEVICE FOR CHECKING THE RESISTANCE TO LATERAL STRAIN (DIN 49406, IEC 60884-1) 
T5-186DEVICE FOR CHECKING THE RESISTANCE TO LATERAL STRAIN (SSA 444, IEC 60884-1) 
T5-187DEVICE FOR CHECKING THE RESISTANCE TO LATERAL STRAIN (EN 50075, IEC 60884-1) 
T5-19PUSH-PULL DYNAMOMETER 100N 
T5-190E26 TEST CAP FOR TORQUE TESTS (7004-21A-2) 
T5-191E12 TEST CAP FOR TORQUE TESTS (7004-28-2) 
T5-192E17 TEST CAP FOR TORQUE TESTS (7004-26-2) 
T5-193SKIRTED E26 TEST CAP FOR TORQUE TESTS (7004-130-1) 
T5-194E26d TEST CAP FOR TORQUE TESTS (7004-29-2) 
T5-195E27/51x39 TEST CAP FOR TORQUE TESTS (7004-27-3) 
T5-196B22d TEST CAP FOR TORQUE TESTS (7004-10-7) 
T5-197B15d TEST CAP FOR TORQUE TESTS (7004-11-6) 
T5-198TEST PIN DIA. 1 x 60 mm, WITH 5 N SPRING (BS 1363-2, Cl. 9.4.1) 
T5-200CONTACT GAUGE 0,2 A (IEC 60320-1, F. 27) 
T5-201NO CONTACT GAUGE 0,2 A (IEC 60320-1, F. 27) 
T5-202CONTACT GAUGE 2,5 A (IEC 60320-1, F. 27) 
T5-203NO CONTACT GAUGE 2,5 A (IEC 60320-1, F. 27) 
T5-204CONTACT GAUGE 6 A (IEC 60320-1, F. 27) 
T5-205NO CONTACT GAUGE 6 A (IEC 60320-1, F. 27) 
T5-206CONTACT GAUGE 10 A (IEC 60320-1, F. 27) 
T5-207NO CONTACT GAUGE 10 A (IEC 60320-1, F. 27) 
T5-208CONTACT GAUGE 16 A (IEC 60320-1, F. 27) 
T5-209NO CONTACT GAUGE 16 A (IEC 60320-1, F. 27) 
T5-21TEST KNIFE SIZE 00 
T5-210GO GAUGE FOR CONNECTORS TO STANDARD SHEET C13 AND C17 (IEC 60320-1, FIG. 9F) 
T5-211NOT-GO GAUGE FOR CONN. TO STANDARD SHEET C13 AND C17 (IEC 60320-1, FIG. 9G) 
T5-212GO GAUGE FOR APPLIANCE INLETS TO STANDARD SHEETS C14, C16 AND C18 (IEC 60320-1, FIG. 9H) 
T5-213GO GAUGE FOR CONN. TO STANDARD SHEET C15 (IEC 60320-1, FIG. 9J) 
T5-214GO GAUGE FOR CONNECTORS TO STANDARD SHEET C15 A (IEC 60320-1, FIG. 9S) 
T5-215NOT GO GAUGE FOR CONN. TO STANDARD SHEET C13, C15 & C17 (IEC 60320-1, FIG. 9R) 
T5-216GO GAUGE FOR APPLIANCE INLETS TO STANDARD SHEET C16A (IEC 60320-1, FIG. 9T) 
T5-22TEST KNIFE SIZE 0 
T5-220APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING C14 (IEC 60320-1, Cl. 16) 
T5-221APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C16 (IEC 60320-1, Cl. 16) 
T5-222APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C16 A (IEC 60320-1, Cl. 16) 
T5-225APPLIANCE INLET GAUGE FOR BREAKING CAPACITY TEST - C14 
T5-226APPLIANCE INLET GAUGE FOR BREAKING CAPACITY TEST - C16 
T5-23TEST KNIFE SIZE 1 
T5-235CONTACT GAUGE FOR EARTHING CONTACT 2,5 A 
T5-236NO CONTACT GAUGE FOR EARTHING CONTACT 2,5 A 
T5-237CONTACT GAUGE FOR EARTHING CONTACT 16 A 
T5-238NO CONTACT GAUGE FOR EARTHING CONTACT 16 A 
T5-24TEST KNIFE SIZE 2 
T5-25TEST KNIFE SIZE 3 
T5-250APPLIANCE INLET GAUGE FOR TEMPERATURE RISE MEASUREMENTS - C14 
T5-251APPLIANCE INLET GAUGE FOR TEMPERATURE RISE MEASUREMENTS - C16 
T5-252APPLIANCE INLET GAUGE FOR TEMPERATURE RISE MEASUREMENTS - C16 A 
T5-253APPLIANCE INLET GAUGE FOR TEMPERATURE RISE MEASUREMENTS C22 
T5-259APPLIANCE INLET GAUGE FOR PULLING TEST - C24 
T5-26TEST KNIFE SIZE 4 
T5-260APPLIANCE INLET GAUGE FOR PULLING TEST C14 
T5-261APPLIANCE INLET GAUGE FOR PULLING TEST - C16 
T5-262APPLIANCE INLET GAUGE FOR PULLING TEST - C16 A 
T5-263APPLIANCE INLET GAUGE FOR PULLING TEST - C2 
T5-264APPLIANCE INLET GAUGE FOR PULLING TEST - C6 
T5-265APPLIANCE INLET GAUGE FOR PULLING TEST - C8 
T5-266APPLIANCE INLET GAUGE FOR PULLING TEST - C10 
T5-267APPLIANCE INLET GAUGE FOR PULLING TEST - C18 
T5-268APPLIANCE INLET GAUGE FOR PULLING TEST - C20 
T5-269APPLIANCE INLET GAUGE FOR PULLING TEST - C22 
T5-27TEST KNIFE SIZE 4a 
T5-270E14 TEST CAP A (IEC 60238, Fig. 13) 
T5-273E14 TEST CAP B (IEC 60238, Fig. 13) 
T5-274E27 TEST CAP B (IEC 60238, Fig. 14) 
T5-275TEST CAP FOR LAMPHOLDERS E40 (IEC 60238 Fig. 15) 
T5-276E27 GAUGE I. FOR TESTING RESILIENCE OF SIDE CONTACT (7006-22C-1) 
T5-277E27 GAUGE II. FOR TESTING RESILIENCE OF SIDE CONTACT (7006-22D-1) 
T5-28FOOT PROBE (EN 836, Fig. 3) 
T5-280E14 TEST CAP FOR INSUL. RESISTANCE TESTING AND TEMP. RAISE MEASURING (IEC 60238 Fig. 11) 
T5-281E27 TEST CAP FOR INSUL. RESISTANCE TESTING AND TEMP. RAISE MEASURING (IEC 60238 Fig. 11) 
T5-282E40 TEST CAP FOR INSUL. RESISTANCE TESTING AND TEMP. RAISE MEASURING (IEC 60238 Fig. 11) 
T5-283E10 TEST CAP FOR INSUL. RESISTANCE TESTING AND TEMP. RAISE MEASURING (IEC 60238 Fig. 11) 
T5-284GAUGE FOR TESTING CONTACT-MAKING OF LAMPS FITTED WITH CAPS E26, E26/50x39,E26/51x39 & E26d (NON-SKIRTED) (7006-29-3) 
T5-285E26d GAUGE FOR CAPS ON FINISHED LAMPS FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT (7006-29A-2) 
T5-286E26d GAUGE WITH REFERENCE DIAMETER OF 23 mm FOR CAPS (7006-29B-2) 
T5-287E26d GAUGE WITH REFERENCE DIAMETER OF 13,2 mm FOR CAPS (7006-29C-2) 
T5-288E26d GAUGE WITH REFERENCE DIAMETER OF 10,4 mm FOR CAPS ON FINISHED LAMPS (7006-29D-1) 
T5-289G5 DOUBLE ENDED GAUGE III. FOR A COMBINED PAIR OF LAMPHOLDERS FOR TESTING CONTACT-MAKING (7006-47B-4, IEC 60400) 
T5-290G5 DOUBLE ENDED GAUGE IV. FOR A COMBINED PAIR OF LAMPHOLDERS FOR TESTING CONTACT-MAKING (7006-47B-4, IEC 60400) 
T5-291G5 DOUBLE ENDED GAUGE V. FOR A COMBINED PAIR OF LAMPHOLDERS FOR TESTING CONTACT-MAKING (7006-47B-4, IEC 60400) 
T5-292E26 "GO" GAUGE FOR LAMPHOLDERS (7006-25B-2) 
T5-293E26 & E26d "NOT GO" GAUGE FOR LAMPHOLDERS (7006-26A-2) 
T5-294E26d GAUGE FOR CHECKING THE RADIAL POSITION OF THE INTERMEDIATE CONTACT OF LAMPHOLDER(7006-29E-1) 
T5-295E26d GAUGE A FOR TESTING THE RELATIVE POSITION OF THE CONTACT IN LAMPHOLDERS (7006-29F-2) 
T5-296E26d GAUGE B FOR TESTING THE RELATIVE POSITION OF THE CONTACT IN LAMPHOLDERS (7006-29F-2) 
T5-297E26d GAUGE FOR TESTING CONTACT-MAKING IN LAMPHOLDERS (7006-29G-3) 
T5-298E26d GAUGE FOR TESTING CONTACT-MAKING IN METAL-SHELL PAPER-LINED LAMPHOLDERS (7006-29H-3) 
T5-299E26d PLUG GAUGE FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT IN LAMPHOLDERS (7006-29J-1) 
T5-300E26d "GO" PLUG GAUGE FOR LAMPHOLDERS (7006-29K-1) 
T5-301GAUGE 947 A1 
T5-302GAUGE 947 A2 
T5-303GAUGE 947 A3 
T5-304GAUGE 947 A4 
T5-305GAUGE 947 A5 
T5-306GAUGE 947 B6 
T5-307GAUGE 947 B7 
T5-308GAUGE 947 B8 
T5-309GAUGE 947 B9 
T5-31DUMMY FUSE LINK SET (4 pcs.) SIZE 00 
T5-310GAUGE 947 B10 
T5-311GAUGE 947 B11 
T5-312GAUGE 947 B12 
T5-313GAUGE 947 B13 
T5-314GAUGE 947 B14 
T5-315GAUGE 947 B15 
T5-316GAUGE 947 B16 
T5-317SET OF GAUGES 947 
T5-32DUMMY FUSE LINK SET (4 pcs.) SIZE 0 
T5-320VESSEL FOR TESTING HOB ELEMENTS AND HOTPLATES DIA. 110 (IEC 60335-2-6, Fig. 101, IEC 60335-2-9, Fig. 103) 
T5-321VESSEL FOR TESTING HOB ELEMENTS AND HOTPLATES DIA. 145 (IEC 60335-2-6, Fig. 101, IEC 60335-2-9, Fig. 103) 
T5-322VESSEL FOR TESTING HOB ELEMENTS AND HOTPLATES DIA. 180 (IEC 60335-2-6, Fig. 101, IEC 60335-2-9, Fig. 103) 
T5-323VESSEL FOR TESTING HOB ELEMENTS AND HOTPLATES DIA. 220 (IEC 60335-2-6, Fig. 101, IEC 60335-2-9, Fig. 103) 
T5-324VESSEL FOR TESTING HOB ELEMENTS AND HOTPLATES DIA. 300 (IEC 60335-2-6, Fig. 101, IEC 60335-2-9, Fig. 103) 
T5-328GLASS VESSEL FOR MICROWAVE OVEN 
T5-32X VESSEL FOR TESTING HOB ELEMENTS AND HOTPLATES t5_32x.jpg
T5-33DUMMY FUSE LINK SET (4 pcs.) SIZE 1 
T5-330LOADING WEIGHT 0.5 KG FOR REFRIGERATORS 
T5-331LOADING WEIGHT 2.3 KG FOR REFRIGERATORS 
T5-335ECCENTRIC WEIGHT FOR OVENS (IEC 60335-2-6, Fig. 103) 
T5-336TEST ROD dia. 6, l 150 
T5-337SHORT TEST PROBE DIA. 12 
T5-338TEST ROD DIA. 40 WITH HEMISPHERICAL END 
T5-339TEST HEMISPHE DIA. 100 
T5-34DUMMY FUSE LINK SET (4 pcs.) SIZE 2 
T5-340G5 PLUG GAUGE FOR LAMPHOLDERS FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT (7006-47A-2) 
T5-341G23 PLUG GAUGE "A" FOR CHECKING MAXIMUM INSERTION FORCE AND MAXIMUM WITHDRAW FORCE IN LAMPHOLDERS (7006-69A-1) 
T5-342G23 and GX23 PLUG GAUGE "B" FOR CHECKING MAXIMUM INSERTION FORCE IN LAMPHOLDER (7006-69B-2) 
T5-343G23 PLUG GAUGE "C" FOR CHECKING MINIMUM RETENTION FORCE IN LAMPHOLDERS 
T5-344G13 DOUBLE ENDED GAUGE III. FOR A COMBINED PAIR OF LAMPHOLDERS FOR TESTING CONTACT-MAKING (7006-60B-4, IEC 60400) 
T5-345G13 DOUBLE ENDED GAUGE IV. FOR A COMBINED PAIR OF LAMPHOLDERS FOR TESTING CONTACT-MAKING (7006-60B-4, IEC 60400) 
T5-346G13 DOUBLE ENDED GAUGE V. FOR A COMBINED PAIR OF LAMPHOLDERS FOR TESTING CONTACT-MAKING (7006-60B-4, IEC 60400) 
T5-347G5 TEST CAP (IEC 60400, Fig. 4) 
T5-348G13 TEST CAP (IEC 60400, Fig. 4) 
T5-35DUMMY FUSE LINK SET (4 pcs.) SIZE 3 
T5-350GO GAUGE FOR CONNECTORS TO STANDARD SHEET C1 (IEC 60320-1, FIG. 2) 
T5-351GO GAUGE FOR CONNECTORS TO STANDARD SHEET C5 (IEC 60320-1, FIG. 4) 
T5-352GO GAUGE FOR CONNECTORS TO STANDARD SHEET C7 (IEC 60320-1, FIG. 5) 
T5-353GO GAUGE FOR SIDE-ENTRY CONNECTORS TO STANDARD SHEET C7 (IEC 60320-1, FIG. 5 bis) 
T5-354NOT-GO GAUGE FOR CONNECTORS TO STANDARD SHEET C1 (IEC 60320-1, FIG. 6) 
T5-355NOT-GO GAUGE FOR CONNECTORS TO STANDARD SHEETS C1, C5 AND C7 (IEC 60320-1, FIG. 7) 
T5-356NOT-GO GAUGE FOR CONNECTORS TO STANDARD SHEETS C1 AND C7 (IEC 60320-1, FIG. 8) 
T5-357NOT-GO GAUGE FOR APPLIANCE INLETS TO STANDARD SHEETS C8, C8A AND C8B (IEC 60320-1, F. 9) 
T5-358GO GAUGE FOR CONNECTORS TO STANDARD SHEET C9 (IEC 60320-1, FIG. 9A) 
T5-359NOT-GO GAUGE FOR CONNECTORS TO STANDARD SHEET C9 (IEC 60320-1, FIG. 9B) 
T5-36DUMMY FUSE LINK SET (4 pcs.) SIZE 4 
T5-360GO GAUGE FOR APPLIANCE INLETS TO STANDARD SHEET C10 (IEC 60320-1, FIG. 9C) 
T5-361GO GAUGE FOR CONNECTORS TO STANDARD SHEET C17 (IEC 60320-1, FIG. 9K) 
T5-362GO GAUGE FOR CONNECTORS TO STANDARD SHEET C19 (IEC 60320-1, FIG. 9L) 
T5-363GO GAUGE FOR APPLIANCE INLETS TO STANDARD SHEETS C20 AND C24 (IEC 60320-1, FIG. 9M) 
T5-364GO GAUGE FOR CONNECTORS TO STANDARD SHEET C21 (IEC 60320-1, FIG. 9N) 
T5-365GO GAUGE FOR APPLIANCE INLETS TO STANDARD SHEET C22 (IEC 60320-1, FIG. 9P) 
T5-366GO GAUGE FOR CONNECTORS TO STANDARD SHEET C23 (IEC 60320-1, FIG. 9Q) 
T5-37DUMMY FUSE LINK SET (4 pcs.) SIZE 4a 
T5-370VESSEL FOR TESTING INDUCTION HOTPLATES DIA. 110 (IEC 60335-2-6, Fig. 102, IEC 60335-2-9, Fig. 104) 
T5-371VESSEL FOR TESTING INDUCTION HOTPLATES DIA. 145 (IEC 60335-2-6, Fig. 102, IEC 60335-2-9, Fig. 104) 
T5-372VESSEL FOR TESTING INDUCTION HOTPLATES DIA. 180 (IEC 60335-2-6, Fig. 102, IEC 60335-2-9, Fig. 104) 
T5-373VESSEL FOR TESTING INDUCTION HOTPLATES DIA. 220 (IEC 60335-2-6, Fig. 102, IEC 60335-2-9, Fig. 104) 
T5-374VESSEL FOR TESTING INDUCTION HOTPLATES DIA. 300 (IEC 60335-2-6, Fig. 102, IEC 60335-2-9, Fig. 104) 
T5-375VESSEL FOR TESTING INDUCTION HOTPLATES DIA. 210 (IEC 60335-2-6, Fig. 102, IEC 60335-2-9, Fig. 104) 
T5-376VESSEL FOR TESTING INDUCTION HOTPLATES DIA. 270 (IEC 60335-2-6, Fig. 102, IEC 60335-2-9, Fig. 104) 
T5-37X VESSELS FOR TESTING INDUCTION HOTPLATES t5_37x.jpg
T5-380"GO" AND "NOT GO" GAUGE FOR STARTERS (IEC 155 fig. 6) 
T5-381"NOT GO" GAUGE FOR STARTERS (IEC 155 fig. 7) 
T5-382"GO" GAUGE FOR STARTERS (IEC 155 fig. 8) 
T5-383"GO" GAUGE FOR STARTERS FOR CLASS II LUMINAIRES (IEC 155 fig. B.2) 
T5-400"GO" GAUGE FOR E27 CAPS ON FINISHED LAMPS (7006-27B-1) 
T5-401"GO" GAUGE FOR E14 CAPS ON FINISHED LAMPS (7006-27F-1) 
T5-402"NOT GO" GAUGE FOR E27 CAPS ON FINISHED LAMPS (7006-28A-1) 
T5-403"NOT GO" GAUGE FOR E14 CAPS ON FINISHED LAMPS (7006-28B-1) 
T5-404"GO" GAUGE FOR DIMENSION "S1" OF E27 CAPS ON FINISHED LAMPS (7006-27C-1) 
T5-405"GO" GAUGE FOR DIMENSION "S1" OF E14 CAPS ON FINISHED LAMPS (7006-27G-1) 
T5-406GAUGE FOR FINISHED LAMPS FITTED WITH E27 CAPS FOR TESTING CONTACT MAKING (7006-50-1) 
T5-407GAUGE FOR FINISHED LAMPS FITTED WITH E14 CAPS FOR TESTING CONTACT MAKING (7006-54-2) 
T5-41RIGID TEST FINGER (IEC 61032, F. 7, TEST PROBE 11) 
T5-411GAUGE FOR E27 CAPS ON FINISHED LAMPS FOR TESTING PROT. AGAINST ACC. CONTACT (7006-51A-2) 
T5-412GAUGE FOR FINISHED LAMPS FITTED WITH E14 CAPS FOR TESTING PROT. AGAINST ACC. CONTACT (7006-55-2) 
T5-413GAUGE FOR E27/51x39 CAPS ON FINISHED LAMPS FOR TESTING PROT. AGAINST ACC. CONTACT (7006-51-2) 
T5-414GAUGE FOR E27 CAPS ON FINISHED LAMPS FOR TESTING PROT. AGAINST ACC. CONTACT DURING INSERTION (7006-51A-2) 
T5-415"NOT GO" GAUGE FOR B15 CAPS ON FINISHED LAMPS (7006-10-8) 
T5-416"NOT GO" GAUGE FOR B22 CAPS ON FINISHED LAMPS (7006-10-8) 
T5-417"GO" GAUGE FOR B15 CAPS ON FINISHED LAMPS (7006-11-8) 
T5-418"GO" GAUGE FOR B22 CAPS ON FINISHED LAMPS (7006-11-8) 
T5-419GAUGE B15d FOR TESTING THE INSERTION OF CAPS IN LAMPHOLDERS (7006-4A-2) 
T5-42RIGID TEST FINGER WITH FORCE METER 50 N 
T5-420GAUGE B22d FOR TESTING THE INSERTION OF CAPS IN LAMPHOLDERS (7006-4A-2) 
T5-421GAUGE FOR TESTING THE RETENTION OF B15d CAPS IN THE HOLDER (7006-4B-1) 
T5-422GAUGE FOR TESTING THE RETENTION OF B22d CAPS IN THE HOLDER (7006-4B-1) 
T5-43RIGID TEST FINGER WITH FORCE METER 100 N 
T5-430E27 HOLDER FOR TORQUE TEST ON LAMPS WITH SCREW CAPS (IEC 60968 F. 3) 
T5-431E26 HOLDER FOR TORQUE TEST ON LAMPS WITH SCREW CAPS (IEC 60968 F. 3, 60432-1 F. C.2) 
T5-432B22 HOLDER FOR TORQUE TEST ON LAMPS WITH BAYONET CAPS (IEC 60968 F. 3, 60432-1 F. C.1) 
T5-433E14 HOLDER FOR TORQUE TEST ON LAMPS WITH SCREW CAPS (IEC 60968 F. 3, 60432-1 F. C.2) 
T5-438"GO" GAUGE FOR CAPS E26, E26/50x39, E26/51x39 & E26d (7006-27D-3) 
T5-440B22d GAUGE FOR CHECKING CONTACT POSITION AND CONTACT FORCE IN BAYONET LAMPHOLDERS (7006-15A-2) 
T5-441BY22d GAUGE FOR CHECKING CONTACT POSITION AND CONTACT FORCE IN BAYONET LAMPHOLDERS (7006-15A-2) 
T5-442B15d GAUGE FOR CHECKING CONTACT POSITION AND CONTACT FORCE IN BAYONET LAMPHOLDERS (7006-15B-1) 
T5-443B15d GAUGE FOR THE SLOTS IN LAMHOLDERS (7006-13-5) 
T5-444B22d, B22d-3 & BY22d GAUGE FOR THE SLOTS IN LAMHOLDERS (7006-13-5) 
T5-445B15d SUPPLEMENTARY "GO" GAUGE FOR LAMPHOLDERS (7006-12C-2) 
T5-446B15 "NOT GO"/RETENTION GAUGE FOR LAMPHOLDERS (7006-12D-2) 
T5-447B22d SUPPLEMENTARY "GO" GAUGE FOR LAMPHOLDERS (7006-12A-2) 
T5-448BY22d SUPPLEMENTARY "GO" GAUGE FOR LAMPHOLDERS (7006-12A-2) 
T5-449B22 "NOT GO"/RETENTION GAUGE FOR LAMPHOLDERS (7006-12B-2) 
T5-45128x2 "GO" AND "NOT GO" FOR BARREL THREAD OF SHADE HOLDER RINGS (60399-IEC-03-1, 60238) 
T5-45240x2,5 "GO" AND "NOT GO" FOR BARREL THREAD OF SHADE HOLDER RINGS (60399-IEC-03-1, 60238) 
T5-45335x2,74 "GO" AND "NOT GO" FOR BARREL THREAD OF SHADE HOLDER RINGS (60399-IEC-03-1, 60238) 
T5-45445x2,74 "GO" AND "NOT GO" FOR BARREL THREAD OF SHADE HOLDER RINGS (60399-IEC-03-1, 60238) 
T5-45520,8x2 "GO" AND "NOT GO" FOR BARREL THREAD OF SHADE HOLDER RINGS (60399-IEC-03-1, 60238) 
T5-457PLUG GAUGE FOR LAMPHOLDERS BY22d (Sh. 7006-17B-1) 
T5-458GAUGE FOR CHECKING CONTACT POSITION AND CONTACT FORCE IN BAYONET LAMPHOLDERS B22d-3 (90/135deg) (Sh. 7006-15-7) 
T5-45920,8x2 "GO" GAUGE FOR BARREL THREAD OF LAMPHOLDERS WITH SHADE HOLDER RING (60399-IEC-04-1, 60238) 
T5-46TEST PIN DIA. 1 x 20 mm (Fig. 1, BS 1363-2) 
T5-46028x2 "GO" GE FOR BARREL THREAD OF LAMPHOLDERS WITH SHADE HOLDER RING (60399-IEC-04-1, 60238) 
T5-46140x2,5 "GO" GE FOR BARREL THREAD OF LAMPHOLDERS WITH SHADE HOLDER RING (60399-IEC-04-1, 60238) 
T5-46235x2,74 "GO" GE FOR BARREL THREAD OF LAMPHOLDERS WITH SHADE HOLDER RING (60399-IEC-04-1, 60238) 
T5-46345x2,74 "GO" GE FOR BARREL THREAD OF LAMPHOLDERS WITH SHADE HOLDER RING (60399-IEC-04-1, 60238) 
T5-46428x2 "NOT GO" GE FOR BARREL THREAD OF LAMPHOLDERS WITH SHADE HOLDER RING (60399-IEC-04-1, 60238) 
T5-46540x2,5 "NOT GO" GE FOR BARREL THREAD OF LAMPHOLDERS WITH SHADE HOLDER RING (60399-IEC-04-1, 60238) 
T5-46635x2,74 "NOT GO" GE FOR BARREL THREAD OF LAMPHOLDERS WITH SHADE HOLDER RING (60399-IEC-04-1, 60238) 
T5-46745x2,74 "NOT GO" GE FOR BARREL THREAD OF LAMPHOLDERS WITH SHADE HOLDER RING (60399-IEC-04-1, 60238) 
T5-468GX24 GAUGE "A" FOR LAMPHOLDER (7006-78A-5) 
T5-469GX24 GAUGE "C" FOR LAMPHOLDER (7006-78C-5) 
T5-47TEST PIN DIA.3-DIA.4, l=15 (IEC 61032, F. 9, TEST PROBE 13) 
T5-470TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS GX10q AND GY10q (IEC 60400 F. 27) 
T5-471TEST CAP FOR THE TEST OF 17.1 FOR LAMPHOLDERS GX10q (IEC 60400 F. 33) 
T5-472PLUG GAUGE "B" FOR CHECKING MINIMUM CONTACT FORCE IN LAMPHOLDER GY10q (Sh. 7006-85C-1) 
T5-473"GO" GAUGE FOR LAMPHOLDER GY10q (Sh. 7006-85B-2) 
T5-474"GO" GAUGE FOR LAMPHOLDER GX10q (Sh. 7006-84C-2) 
T5-475PLUG GAUGE "B" FOR CHECKING MINIMUM CONTACT FORCE IN LAMPHOLDERS GX10q TYPE A AND MINIMUM RETENTION FORCE IN LAMPHOLDERS TYPE B (Sh. 7006-84D-1) 
T5-476PLUG GAUGE LAMPHOLDER BA21 (Sh. 7006-12-8) 
T5-477PLUG GAUGE LAMPHOLDER B15 (Sh. 7006-12-8) 
T5-478PLUG GAUGE LAMPHOLDER B22 (Sh. 7006-12-8) 
T5-479"GO" AND "NOT GO" PLUG GAUGE FOR BAYONET LAMPHOLDER B22d-3 (Sh. 7006-20-4) 
T5-48TEST PIN DIA. 4 x 100 mm 
T5-48020,8x2 "NOT GO" GE FOR BARREL THREAD OF LAMPHOLDERS WITH SHADE HOLDER RING (60399-IEC-04-1, 60238) 
T5-481G24, GX24 & GY24 "NOT GO" GAUGE "F" FOR CHECKING NON-INTERCHANGEABILITY OF CAPS IN LAMPHOLDERS (7006-78F-6 Fig. 1) 
T5-482G24, GX24 & GY24 "NOT GO" GAUGE "F" FOR CHECKING NON-INTERCHANGEABILITY OF CAPS IN LAMPHOLDERS (7006-78F-6 Fig. 2) 
T5-483G24, GX24 & GY24 "NOT GO" GAUGE "F" FOR CHECKING NON-INTERCHANGEABILITY OF CAPS IN LAMPHOLDERS (7006-78F-6 Fig. 3) 
T5-484G24, GX24 & GY24 "NOT GO" GAUGE "F" FOR CHECKING NON-INTERCHANGEABILITY OF CAPS IN LAMPHOLDERS (7006-78F-6 Fig. 4) 
T5-485G24, GX24 "NOT GO" GAUGE "F" FOR CHECKING NON-INTERCHANGEABILITY OF CAPS IN LAMPHOLDERS (7006-78F-6 Fig. 5) 
T5-486G24, GX24 "NOT GO" GAUGE "F" FOR CHECKING NON-INTERCHANGEABILITY OF CAPS IN LAMPHOLDERS (7006-78F-6 Fig. 6) 
T5-487G24, GX24 "NOT GO" GAUGE "F" FOR CHECKING NON-INTERCHANGEABILITY OF CAPS IN LAMPHOLDERS (7006-78F-6 Fig. 7) 
T5-488GO AND NOT GO GAUGE FOR CAPS G24, GX24 & GY24 (Sh. 7006-78-5, Fig. 1) 
T5-489GO AND NOT GO GAUGE FOR CAPS G24, GX24 & GY24 (Sh. 7006-78-5, Fig. 2) 
T5-49LONG TEST PIN DIA.3-DIA.4, l=50 
T5-490GO AND NOT GO GAUGE FOR CAPS G24, GX24 & GY24 (Sh. 7006-78-5, Fig. 3) 
T5-491GO AND NOT GO GAUGE FOR CAPS G24, GX24 & GY24 (Sh. 7006-78-5, Fig. 4) 
T5-492GO AND NOT GO GAUGE FOR CAPS G24q-5 & GX24q-5 (Sh. 7006-78-5, Fig. 1) 
T5-493G5.3 "GO" GAUGE FOR LAMHOLDERS (7006-73A-1) 
T5-494GX5.3 "GO" GAUGE FOR LAMPHOLDERS (7006-73D-3) 
T5-495GY5.3 "GO" GAUGE FOR LAMPHOLDERS (7006-73E-3) 
T5-496GY5.3 SINGLE PIN GAUGE FOR CHECKING MINIMUM RETENTION FORCE OF CONTACTS IN LAMPHOLDERS (7006-73J-1) 
T5-497GZ10 "GO" AND "NOT GO" GAUGE FOR BASES (7006-120-1) 
T5-498G5 DOUBLE ENDED GAUGE V. FOR A COMBINED PAIR OF LAMPHOLDERS FOR TESTING CONTACT-MAKING (7006-47B-4) (Change E=2.44 D=4.4 mm) 
T5-499G13 DOUBLE ENDED GAUGE V. FOR A COMBINED PAIR OF LAMPHOLDERS FOR TESTING CONTACT-MAKING (7006-60B-4) (Change E=2.44 D = 12.35 mm) 
T5-50TEST PROBE DIA. 30 x 80 mm (IEC 61032, F. 9, TEST PROBE 41) 
T5-51RIGID STEEL WIRE DIA. 1 WITH HANDLE & STOP SPHERE (IEC 61032 - Test probe D) 
T5-52RIGID STEEL ROD DIA. 2,5 WITH HANDLE & STOP SPHERE (IEC 61032 - Test probe C) 
T5-534GU10 "GO" AND "NOT GO" GAUGE FOR BASES (7006-121-1) 
T5-541R7s "GO" GAUGE FOR A COMBINED PAIR OF LAMPHOLDERS Z=118mm (7006-62-4) 
T5-542R7s "GO" GAUGE FOR A COMBINED PAIR OF LAMPHOLDERS Z=189mm (7006-62-4) 
T5-543R7s "GO" GAUGE FOR A COMBINED PAIR OF LAMPHOLDERS Z=254mm (7006-62-4) 
T5-544R7s "GO" GAUGE FOR A COMBINED PAIR OF LAMPHOLDERS Z=333mm (7006-62-4) 
T5-545SINGLE PIN GAUGE "E" FOR CHECKING MINIMUM RETENTION FORCE OF CONTACTS IN LAMPHOLDERS G5, 2G(X)7, 2G10, 2G11, G13, G(X)23, G(X)(Y)24, G(X)(Y)32 (7006-69E-5) 
T5-546G5 "GO" AND "NO GO" GAUGE FOR UNMOUNTED BI-BIN CAP (7006-46-3) 
T5-547G13 "GO" AND "NO GO" GAUGE FOR UNMOUNTED BI-BIN CAP (7006-44-4) 
T5-548G6.35, GX6.35 & GZ6.35 "GO" AND "NOT GO" GAUGE FOR BASES (7006-61-5) 
T5-549GY6.35 "GO" AND "NOT GO" GAUGE FOR BASES (7006-61-5) 
T5-55TEST PIN DIA. 2 x 100 mm 
T5-550G4 GAUGE A - "GO" AND "NOT GO" GAUGE FOR PINS OF BI-PIN LAMP BASES (7006-72-1) 
T5-551G4 GAUGE B - "GO" GAUGE FOR BASE OF BI-PIN LAMP BASES (7006-72-1) 
T5-552G5.3 GAUGE FOR BI-PIN CAP ON FINISHED LAMPS (7006-73-1) 
T5-553G5.3 "GO" GAUGE FOR BASE (7006-126-1) 
T5-554GU10 "GO" AND "NOT GO" GAUGE FOR BASES (7006-121-1) isti kot T5-534 
T5-555GR8&GR10q GO GAUGE FOR CHECKING THE PINS OF CAPS ON FINISHED LAMPS (7006-68E-1) 
T5-556GR8&GR10q GO AND NOT GO GAUGE FOR CHECKING THE PINS OF CAPS (7006-68F-1) 
T5-557GR10q GO GAUGE FOR UNMOUNTED CAPS (7006-77-2) 
T5-558GR10q GAUGE FOR CAPS TO ENSURE ENTRY OF MAXIMUM LAMPHOLDERS AND TO CHECK PIN SPACING AND LENGTH (7006-77A-2) 
T5-559GX10q GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-84-2) 
T5-56TEST HOOK (IEC 60065, Figure 4) 
T5-560GX10q NOT GO GAUGE "A" FOR CAPS ON FINISHED LAMPS (7006-84A-1) 
T5-561GX10q NOT GO GAUGE "B" FOR CAPS ON FINISHED LAMPS (7006-84B-1) 
T5-562GY10q GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-85-2) 
T5-563GY10q NOT GO GAUGE "A" FOR CAPS ON FINISHED LAMPS (7006-85A-1) 
T5-564G13 HEATED TEST CAP A FOR TESTING OF RESISTANCE TO HEAT OF LAMPHOLDERS WITH T MARKING (IEC 60400 Fig. 9) 
T5-565G13 HEATED TEST CAP B FOR TESTING OF RESISTANCE TO HEAT OF LAMPHOLDERS WITH T MARKING (IEC 60400 Fig. 9) 
T5-566G5 HEATED TEST CAP FOR TESTING OF RESISTANCE TO HEAT OF LAMPHOLDERS WITH T MARKING (IEC 60400 Fig. 9a) 
T5-568SET OF GAUGES A1-A16 (IEC 60947-1, Fig. 2) 
T5-569SET OF GAUGES B1-B16 (IEC 60947-1, Fig. 2) 
T5-571GAUGE FOR TESTING MAX. WITHDRAWAL FORCE OF PLUG 2P AC 250V 2,5A (DIN VDE 0620-1 Fig.16d) 
T5-572GAUGE L1 FOR TESTING SOCKET OUTLETS (DIN 49 440 - L1) 
T5-573GAUGE L2 FOR TESTING SOCKET OUTLETS (DIN 49 440 - L2) 
T5-574RING GAUGE DIN 49 441 - L1 
T5-575RING GAUGE DIN 49 441 - L2 
T5-577GAUGE 14 (DIN VDE 0620-1) 
T5-578GAUGE 16A (DIN VDE 0620-1) 
T5-579E14 HOLDER FOR TORSION TEST ON LAMPS WITH SCREW CAPS (IEC 60968, Fig. 2) 
T5-58TEST PIN DIA. 1 x 100 mm 
T5-580E27 HOLDER FOR TORSION TEST ON LAMPS WITH SCREW CAPS (IEC 60968, Fig. 2) 
T5-581B15 HOLDER FOR TORQUE TEST ON LAMPS WITH BAYONET CAPS (IEC 60968, Fig. 3) 
T5-582B22 HOLDER FOR TORQUE TEST ON LAMPS WITH BAYONET CAPS (IEC 60968, Fig. 3) 
T5-583GX10q-1 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-84E-1) 
T5-584GX10q-2 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-84E-1) 
T5-585GX10q-3 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-84E-1) 
T5-586GX10q-4 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-84E-1) 
T5-587GX10q-5 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-84E-1) 
T5-588GX10q-6 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-84E-1) 
T5-589GY10q-1 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-85D-1) 
T5-59TEST PROBE DIA. 12 (IEC 60950, Fig. 2C) 
T5-590GY10q-2 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-85D-1) 
T5-591GY10q-3 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-85D-1) 
T5-592GY10q-4 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-85D-1) 
T5-593GY10q-5 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-85D-1) 
T5-594GY10q-6 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-85D-1) 
T5-595GAUGE FOR CHECKING SIDE CONTACTS (F. 43 - DIN VDE 0620-1) 
T5-596"GO" GAUGE A FOR THE CONTACTS OF LAMPHOLDERS G10q, GX10q, GY10q & GZ10q (7006-79A-2) 
T5-597"GO" GAUGE B FOR THE CONTACTS OF LAMPHOLDERS G10q, GX10q, GY10q & GZ10q (7006-79A-2) 
T5-598CONTACT MAKING GAUGE FOR LAMPHOLDERS G10q, GX10q, GY10q (7006-79B-1) 
T5-60STRAIGHT PROBE DIA. 38 (UL 153, Fig. 1) 
T5-600APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C2 (IEC 60320-1, Cl. 16) 
T5-601APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C6 (IEC 60320-1, Cl. 16) 
T5-602APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C8 (IEC 60320-1, Cl. 16) 
T5-603APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C10 (IEC 60320-1, Cl. 16) 
T5-604APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C18 (IEC 60320-1, Cl. 16) 
T5-605APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C20 (IEC 60320-1, Cl. 16) 
T5-606APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C22 (IEC 60320-1, Cl. 16) 
T5-607APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C24 (IEC 60320-1, Cl. 16) 
T5-61TEST SPHERE DIA. 50, 0,51 kg 
T5-611GAUGE FOR THE VERIFICATION OF THE MINIMUM WITHDRAWAL FORCE 1.5 N - C1, C5 and C7 (IEC 60320-1, Cl. 16) 
T5-612GAUGE FOR THE VERIFICATION OF THE MINIMUM WITHDRAWAL FORCE 1.5 N - C5 (LONG) (IEC 60320-1, Cl. 16) 
T5-613GAUGE FOR THE VERIFICATION OF THE MINIMUM WITHDRAWAL FORCE 1.5 N - C9, C13, C15, C15A, AND C17 (IEC 60320-1, Cl. 16) 
T5-614GAUGE FOR THE VERIFICATION OF THE MINIMUM WITHDRAWAL FORCE 1.5 N - C13, C15 AND C15A (LONG) (IEC 60320-1, Cl. 16) 
T5-615GAUGE FOR THE VERIFICATION OF THE MINIMUM WITHDRAWAL FORCE 2 N - C19, C21 AND C23 (IEC 60320-1, Cl. 16) 
T5-616GAUGE FOR THE VERIFICATION OF THE MINIMUM WITHDRAWAL FORCE 2 N - C19, AND C21 (LONG) (IEC 60320-1, Cl. 16) 
T5-62RIGID SPHERE DIA. 12.5 
T5-620GO GAUGE FOR APPLIANCE OUTLETS TO STANDARD SHEET F (IEC 320-2-2, FIG. 101) 
T5-621GO GAUGE FOR APPLIANCE OUTLETS TO STANDARD SHEET H (IEC 320-2-2, FIG. 102) 
T5-622GO GAUGE FOR APPLIANCE OUTLETS TO STANDARD SHEET J (IEC 320-2-2, FIG. 103) 
T5-623GO GAUGE FOR APPLIANCE OUTLETS TO STANDARD SHEET L (IEC 320-2-2, FIG. 104) 
T5-63TEST SPHERE 0,5 kg (IEC 60950-1) 
T5-630GO GAUGE FOR STARTERS FOR CLASS II LUMINAIRES (Fig. B2, IEC 155) 
T5-631GO GAUGE FOR BI-PIN CAP ON FINISHED LAMPS G5 (Sh. 7006-46A-3) 
T5-632GO GAUGE FOR BI-PIN CAP ON FINISHED LAMPS G13 (Sh. 7006-45-4) 
T5-633GO AND NOT GO GAUGE FOR CAPS ON FINISHED LAMPS 2G7 & 2GX7 (Sh. 7006-102-1) 
T5-638GO GAUGE FOR CAPS ON FINISHED LAMPS 2G11 (Sh. 7006-82-1) 
T5-639GO GAUGE FOR CAPS ON FINISHED LAMPS G10q, GX10q, GY10q, GZ10q (Sh. 7006-79-2) 
T5-64TEST SPHERE DIA. 40 (IEC 60950-1, 60065) 
T5-640GO GAUGE FOR SINGLE-PIN CAP Fa8 (Sh. 7006-40-1) 
T5-641NOT GO GAUGE FOR SINGLE-PIN CAP Fa8 (Sh. 7006-40A-1) 
T5-642GO AND NOT GO GAUGE FOR SINGLE-PIN CAP ON FINISHED LAMPS Fa6 (Sh. 7006-41-2) 
T5-643GO GAUGE FOR CAPS 2G13-41 (Sh. 7006-33-2) 
T5-644GO GAUGE FOR CAPS 2G13-56 (Sh. 7006-33-2) 
T5-645GO GAUGE FOR CAPS 2G13-92 (Sh. 7006-33-2) 
T5-646GO GAUGE FOR CAPS 2G13-152 (Sh. 7006-33-2) 
T5-647GO AND NOT GO GAUGE FOR RECESSED DOUBLE COONTACT CAP R17d ON FINISHED LAMPS (Sh. 7006-57-3) 
T5-650GAUGE FOR THE VERIFICATION OF MAXIMUM WITHDRAWAL FORCE (F. 101, IEC 60884-2-4) 
T5-651GAUGE FOR THE VERIFICATION OF MINIMUM WITHDRAWAL FORCE (F. 102, IEC 60884-2-4) 
T5-652GAUGE C1 FOR SIZE OF ENTRY HOLES FOR PLUG PINS DIA. 5,8 MM (F. 1, CEE 7, VDE0620-1 Gauge 1) 
T5-653GAUGE C1 FOR SIZE OF ENTRY HOLES FOR PLUG PINS DIA. 6 MM (F. 1, CEE 7, VDE0620-1 Gauge 1) 
T5-654GAUGE C2A FOR MINIMUM OPENING OF CONTACT TUBES, 400 G (F. 2 CEE 7) 
T5-655GAUGE C2B FOR MINIMUM OPENING OF CONTACT TUBES, 400 G (F. 2 CEE 7) 
T5-656GAUGE C3 FOR ACCEPTANCE OF TWO-POLE PLUGS (F. 3 CEE 7, VDE0620-1 Gauge 3) 
T5-657GAUGE C4 FOR ACCEPTANCE OF TWO-POLE PLUGS WITH SIDE EARTHING-CONTACTS (F. 4 CEE 7, VDE0620-1 Gauge 4) 
T5-658GAUGE C6A FOR FIXING HOLES OR SLOTS (F. 6 CEE 7) 
T5-659GAUGE C6B FOR FIXING HOLES OR SLOTS (F. 6 CEE 7) 
T5-66RIGID TEST SPHERE WITH GUARD DIA. 50 
T5-660GAUGE C7A FOR DISTANCE TO POINT OF FIRST CONTACT (F. 7 CEE 7, VDE0620-1 Gauge 5) 
T5-661GAUGE C7B FOR DISTANCE TO POINT OF FIRST CONTACT (F. 7 CEE 7, VDE0620-1 Gauge 5) 
T5-662GAUGE C7C FOR DISTANCE TO POINT OF FIRST CONTACT (F. 7 CEE 7, VDE0620-1 Gauge 5) 
T5-663GAUGE C7D FOR DISTANCE TO POINT OF FIRST CONTACT (F. 7 CEE 7, VDE0620-1 Gauge 5) 
T5-664GAUGE C8 FOR WIRING CHANNEL (F. 8 CEE 7) 
T5-665"GO" GAUGE C9A FOR PIN DIAMETER (Fig. 9 CEE 7; EN 50075, Fig. 1, VDE0620-1 Gauge 6) 
T5-666"NOT GO" GAUGE C9A FOR PIN DIAMETER (Fig. 9 CEE 7; EN 50075, Fig. 1, VDE0620-1 Gauge 6) 
T5-667"GO" GAUGE C9B FOR PIN DIAMETER (F. 9 CEE 7, VDE0620-1 Gauge 6) 
T5-668"NOT GO" GAUGE C9B FOR PIN DIAMETER (F. 9 CEE 7, VDE0620-1 Gauge 6) 
T5-669GAUGE C10A FOR PIN SPACING (F. 10 CEE 7, VDE0620-1 Gauge 7) 
T5-67DYNAMOMETER 20 N 
T5-670GAUGE C10B FOR PIN SPACING (F. 10 CEE 7, VDE0620-1 Gauge 7) 
T5-671GAUGE C11 FOR MAXIMUM OPENING OF CONTACT TUBES (F. 11 CEE 7, VDE0620-1 Gauge 8) 
T5-672GAUGE C12 FOR INTERCHANGEABILITY (F. 12 CEE 7, VDE0620-1 Gauge 9) 
T5-673GAUGE FOR INTERCHANGEABILITY (F. 13 CEE 7; EN 50075, Fig. 2) 
T5-674GAUGE FOR DIMENSIONS OF MOUNTING BOXES (F. 14 CEE 7) 
T5-675GAUGE FOR NON-INTERCHANGEABILITY WITH TWO-POLE PLUGS WITH EARTHING CONTACTS (F. 15 CEE 7) 
T5-676GAUGE FOR NON-ACCEPTANCE OF TWO-POLE PLUGS WITHOUT EARTHING CONTACT (F. 16 CEE 7, VDE0620-1 Gauge 11) 
T5-677GAUGE FOR CHECKING IMPOSSIBILITY OF SINGLE-POLE INSERTION OF PLUGS (F. 18 CEE 7, VDE0620-1 Gauge 10) 
T5-678GAUGE A FOR CHECKING IMPOSSIBILITY OF SINGLE-POLE INSERTION OF PLUGS INTO SOCKET OUTLETS. 250 G (F. 19 CEE 7 ) 
T5-679GAUGE B FOR CHECKING IMPOSSIBILITY OF SINGLE-POLE INSERTION OF PLUGS INTO SOCKET OUTLETS. 250 G (F. 19 CEE 7, VDE0620-1 GAUGE 12) 
T5-68DYNAMOMETER 50N 
T5-680GAUGE A FOR CHECKING IMPOSSIBILITY OF SINGLE-POLE INSERTION OF PLUGS INTO SOCKET OUTLETS. 1000 G (F. 19 CEE 7 ) 
T5-681GAUGE B FOR CHECKING IMPOSSIBILITY OF SINGLE-POLE INSERTION OF PLUGS INTO SOCKET OUTLETS. 1000 G (F. 19 CEE 7, VDE0620-1 GAUGE 12) 
T5-684CONTACT TEST GAUGE (F. 12, BS 1363-2) 
T5-686TURNING MOMENT GAUGE (F. 15, BS 1363-2) 
T5-687WITHDRAWAL PULL GAUGE A FOR EFFECTIVENESS OF CONTACT (F. 16, BS 1363-2) 
T5-688WITHDRAWAL PULL GAUGE B FOR EFFECTIVENESS OF CONTACT (F. 16, BS 1363-2) 
T5-689TEST PLUG FOR TEMPERATURE RISE (F. 30, BS 1363-2) 
T5-69DYNAMOMETER 100 N 
T5-690TEST PLUG FOR BREAKING CAPACITY TEST (F. 1-15, ANSI WD 6) 
T5-691TEST PLUG FOR BREAKING CAPACITY TEST (F. 5-15, ANSI WD 6) 
T5-692TEST PLUG FOR BREAKING CAPACITY TEST (F. 1-20, ANSI WD 6) 
T5-693TEST PLUG FOR BREAKING CAPACITY TEST (F. 5-20, ANSI WD 6) 
T5-694TEST FLANGED INLET FOR BREAKING CAPACITY TEST (FOR 1-15, ANSI WD 6) 
T5-695TEST FLANGED INLET FOR BREAKING CAPACITY TEST (FOR 5-15, ANSI WD 6) 
T5-696TEST FLANGED INLET FOR BREAKING CAPACITY TEST (FOR 1-20, ANSI WD 6) 
T5-697TEST FLANGED INLET FOR BREAKING CAPACITY TEST (FOR 5-20, ANSI WD 6) 
T5-698TEST PLUG R1 FOR BREAKING CAPACITY TEST (DIN 49 441) 
T5-699TEST PLUG FOR BREAKING CAPACITY TEST (F. 4, BS 1363-1) 
T5-70PROBE FOR CONDUIT ENTRIES DIA. 16 mm 
T5-700TEST CAP B22d (IEC 61184, Fig. 6 ) 
T5-701TEST CAP B22d FOR INSULATION RESISTANCE NAD HIGH-VOLTAGE TESTS (IEC 61184, Fig. 11) 
T5-702GAUGE FOR HOLES FOR BACKPLATE LAMPHOLDERS SCREWES (IEC 61184, Fig. 3) 
T5-703TEST HOLDER FOR TORSION TEST FOR G5 CAPPED LAMPS (IEC 61195, Fig. A.1) 
T5-704TEST HOLDER FOR TORSION TEST FOR G13 CAPPED LAMPS (IEC 61195, Fig. A.1) 
T5-705G5 DOUBLE ENDED "GO" GAUGE I. FOR A COMBINED PAIR OF LAMPHOLDERS (7006-47C-3) 
T5-706G5 DOUBLE ENDED "GO" GAUGE II. FOR A COMBINED PAIR OF LAMPHOLDERS (7006-47C-3) 
T5-707G13 DOUBLE ENDED "GO" GAUGE I. FOR A COMBINED PAIR OF LAMPHOLDERS (7006-60C-3) 
T5-708G13 DOUBLE ENDED "GO" GAUGE II. FOR A COMBINED PAIR OF LAMPHOLDERS (7006-60C-3) 
T5-71PROBE FOR CONDUIT ENTRIES DIA. 20 mm 
T5-710"GO" GAUGE FOR LAMPHOLDERS G4 (Sh. 7006-72A-3) 
T5-711GAUGE FOR CHECKING MINIMUM RETENTION FORCE IN LAMPHOLDERS G4 (Sh. 7006-72B-2) 
T5-712GO GAUGE FOR G9 LAMPHOLDERS (Sh. 7006-129B-1) 
T5-713GO GAUGE FOR CHECKING MAXIMUM INSERTION AND WITHDRAWAL TORQUE IN LAMPHOLDERS GU10 (Sh. 7006-121A-2) 
T5-717GAUGE "A" FOR CHECKING LAMPHOLDERS G12 (Sh. 7006-80A-2) 
T5-718GAUGE "B" FOR CHECKING LAMPHOLDERS G12 (Sh. 7006-80B-2) 
T5-719GAUGE "C" FOR CHECKING LAMPHOLDERS G12 (Sh. 7006-80C-2) 
T5-72GAUGE FOR CHECKING NON-ACCESSIBILITY OF LIVE PARTS, THROUGH SHUTTERS, AND FO LIVE PARTS OF SOCKET-OUTLETS WITH INCREASED PROTECTION; DIA. 1 x 80 mm (IEC 60884-1, F. 10) 
T5-720STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 50 mm (IEC 60335-2-6) 
T5-721STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 60 mm (IEC 60335-2-6) 
T5-722STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 70 mm (IEC 60335-2-6) 
T5-723STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 80 mm (IEC 60335-2-6) 
T5-724STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 90 mm (IEC 60335-2-6) 
T5-725STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 100 mm (IEC 60335-2-6) 
T5-726STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 110 mm (IEC 60335-2-6) 
T5-727STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 120 mm (IEC 60335-2-6) 
T5-728STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 130 mm (IEC 60335-2-6) 
T5-729STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 140 mm (IEC 60335-2-6) 
T5-73GAUGE FOR CHECKING NON-ACCESSIBILITY OF LIVE PARTS, THROUGH SHUTTERS; 1 x 3 x 80 mm (IEC 60884-1, F. 9) 
T5-730STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 150 mm (IEC 60335-2-6) 
T5-731STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 160 mm (IEC 60335-2-6) 
T5-732STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 170 mm (IEC 60335-2-6) 
T5-733STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 180 mm (IEC 60335-2-6) 
T5-734STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 190 mm (IEC 60335-2-6) 
T5-735STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 200 mm (IEC 60335-2-6) 
T5-736STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 210 mm (IEC 60335-2-6) 
T5-737STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 220 mm (IEC 60335-2-6) 
T5-738STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 230 mm (IEC 60335-2-6) 
T5-739STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 240 mm (IEC 60335-2-6) 
T5-740STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 250 mm (IEC 60335-2-6) 
T5-741STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 260 mm (IEC 60335-2-6) 
T5-742STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 270 mm (IEC 60335-2-6) 
T5-743STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 280 mm (IEC 60335-2-6) 
T5-744STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 290 mm (IEC 60335-2-6) 
T5-745STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 300 mm (IEC 60335-2-6) 
T5-746IRON BAR 100 x 20 x 2 mm (IEC 60335-2-6) 
T5-747"GO" GAUGE FOR CHECKING MAXIMUM INSERTION TORQUE IN LAMPHOLDERS GZ10 (Sh. 7006-120A-2) 
T5-748"GO" GAUGE FOR CHECKING MAXIMUM WITHDRAWAL TORQUE IN LAMPHOLDERS GZ10 (Sh. 7006-120A-2) 
T5-749GAUGE B FOR CHECKING IMPOSSIBILITY OF SINGLE-POLE INSERTION OF PLUGS (VDE0620-1 Gauge 10) 
T5-75JOINTED TEST FINGER (IEC 61032, F. 2, TEST PROBE B) 
T5-750GO PLUG GAUGE A FOR STARTHOLDERS (IEC 60400, F. 11) 
T5-751GO PLUG GAUGE B FOR STARTHOLDERS (IEC 60400, F. 11) 
T5-752PLUG GAUGE FOR STARTHOLDERS FOR TESTING CONTACT MAKING & RETENTION (IEC 60400, F. 12) 
T5-753SPECIAL PLUG GAUGE FOR STARTHOLDERS FOR TESTING CONTACT MAKING (IEC 60400, F. 13) 
T5-754TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS G5 (IEC 60400, F. 14) 
T5-755TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS G13 (IEC 60400, F. 15) 
T5-756TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS 2G13-41 (IEC 60400, F. 16) 
T5-757TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS 2G13-56 (IEC 60400, F. 16) 
T5-758TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS 2G13-92 (IEC 60400, F. 16) 
T5-759TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS 2G13-152 (IEC 60400, F. 16) 
T5-76TEST NAIL (IEC 60335-1, F. 7) 
T5-760TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS G20 (IEC 60400, F. 17) 
T5-761TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS Fa6 (IEC 60400, F. 18) 
T5-762TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS G10q (IEC 60400, F. 19) 
T5-763TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS Fa8 (IEC 60400, F. 20) 
T5-765TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS R17d (IEC 60400, F. 22) 
T5-766TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS 2G11 (IEC 60400, F. 23) 
T5-767TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS G23 AND GX23 (IEC 60400, F. 24) 
T5-768TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS GR10q (IEC 60400, F. 26) 
T5-769TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS G24 AND GY24 (IEC 60400, F. 28) 
T5-77SMALL TEST FINGER - TEST PROBE 18 
T5-770TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS G32 AND GY32 (IEC 60400, F. 29) 
T5-771TEST CAP FOR THE TEST OF 17.1 FOR LAMPHOLDERS G23 (IEC 60400, F. 30) 
T5-772TEST CAP FOR THE TEST OF 17.1 FOR LAMPHOLDERS GR8 (IEC 60400, F. 31) 
T5-773TEST CAP FOR THE TEST OF 17.1 FOR LAMPHOLDERS GR10q (IEC 60400, F. 32) 
T5-774TEST CAP FOR THE TEST OF 17.1 FOR LAMPHOLDERS GY10q (IEC 60400, F. 34) 
T5-775TEST CAP FOR THE TEST OF 17.1 FOR LAMPHOLDERS 2G11 (IEC 60400, F. 35) 
T5-776TEST CAP FOR THE TEST OF 17.1 FOR LAMPHOLDERS GX23 (IEC 60400, F. 36) 
T5-777TEST CAP FOR THE TEST OF 17.1 FOR LAMPHOLDERS G24 AND GY24 (IEC 60400, F. 37) 
T5-778TEST CAP FOR THE TEST OF 17.1 FOR LAMPHOLDERS G32, GX32 AND GY32 (IEC 60400, F. 38) 
T5-779TEST CAP FOR THE TEST OF CLAUSE 13 (IEC 60400, F. 21) 
T5-78GAUGE FOR VERIFICATION OF GROOVES, HOLES AND REVERSE TAPERS DIA. 2.5, l 100 
T5-780GAUGE FOR DEPTH OF NO-CONTACT TESTS FOR 10 A AND 15 A SOCKET-OUTLETS (AS3112, FIG. 3.1) 
T5-781GAUGE FOR DEPTH OF NO-CONTACT TESTS FOR 20 A SOCKET-OUTLETS (AS3112, FIG. 3.1) 
T5-782DEVICE FOR CHECKING THE RESISTANCE TO LATERAL STRAIN (AS3112, FIG. 3.6) 
T5-78310 A THREE-PIN TEST PLUG FOR CHECKING THREE-PIN FLAT-PIN 250 V MAX SOCKET-OUTLETS AGAINST THE STANDARD TEST FINGER (AS3112, FIG. C1) 
T5-78415 A THREE-PIN TEST PLUG FOR CHECKING THREE-PIN FLAT-PIN 250 V MAX SOCKET-OUTLETS AGAINST THE STANDARD TEST FINGER (AS3112, FIG. C1) 
T5-78520 A THREE-PIN TEST PLUG FOR CHECKING THREE-PIN FLAT-PIN 250 V MAX SOCKET-OUTLETS AGAINST THE STANDARD TEST FINGER (AS3112, FIG. C1) 
T5-78610 A THREE-PIN TEST PLUG FOR CHECKING THREE-PIN FLAT-PIN 250 V MAX SOCKET-OUTLETS AGAINST INCORRECT INSERTION OF PLUGS (AS3112, FIG. D1) 
T5-78715 A THREE-PIN TEST PLUG FOR CHECKING THREE-PIN FLAT-PIN 250 V MAX SOCKET-OUTLETS AGAINST INCORRECT INSERTION OF PLUGS (AS3112, FIG. D1) 
T5-78820 A THREE-PIN TEST PLUG FOR CHECKING THREE-PIN FLAT-PIN 250 V MAX SOCKET-OUTLETS AGAINST INCORRECT INSERTION OF PLUGS (AS3112, FIG. D1) 
T5-789GX10q-1 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-84F-1) 
T5-79LONG TEST PIN DIA. 4, l=50 (TEST PROBE 12) 
T5-790GX10q-2 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-84F-1) 
T5-791GX10q-3 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-84F-1) 
T5-792GX10q-4 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-84F-1) 
T5-793GX10q-5 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-84F-1) 
T5-794GX10q-6 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-84F-1) 
T5-795GY10q-1 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-85E-1) 
T5-796GY10q-2 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-85E-1) 
T5-797GY10q-3 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-85E-1) 
T5-798GY10q-4 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-85E-1) 
T5-799GY10q-5 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-85E-1) 
T5-80TEST PLUG FOR ANTENNA COAXIAL SOCKETS 
T5-800GY10q-6 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-85E-1) 
T5-801GO GAUGES (MIN. AND MAX) FOR SOCKET OUTLET (F. 11, BS 1363-1, 1363-2) 
T5-802CONTACT TEST GAUGE (F. 12, BS 1363-2) 
T5-803GAUGE FOR PLUG PINS (F. 5, BS 1363-1) 
T5-804NON-CONTACT TEST GAUGE (F. 14, BS 1363-2) 
T5-805GAUGE 2A FOR MINIMUM OPENING OF CONTACT TUBES, 200 g (VDE0620-1 Gauge 2) 
T5-806GAUGE 2B FOR MINIMUM OPENING OF CONTACT TUBES, 200 g (VDE0620-1 Gauge 2) 
T5-807GAUGE 2C FOR MINIMUM OPENING OF CONTACT TUBES, 300 g (VDE0620-1 Gauge 2) 
T5-808GAUGE 1 FOR SIZE OF ENTRY HOLES FOR PLUG PINS DIA. 5 mm (VDE0620-1 Gauge 1) 
T5-809GAUGE 16b FOR TESTING MAX. WITHDRAWAL FORCE OF 3-PHASE 16A PLUG (VDE 0620-1 Fig.16b) 
T5-81E14 GAUGE FOR MINIMUM DISTANCE FROM OUTER END OF SCREW SHELL TO CENTRAL CONT. 
T5-810GAUGE 16c FOR TESTING MAX. WITHDRAWAL FORCE OF 3-PHASE 25A PLUG (VDE 0620-1 Fig.16c) 
T5-811GO GAUGE FOR G9 BASE (Sh. 7006-129-1) 
T5-812NOT GO GAUGE FOR G9 BASE (Sh. 7006-129A-1) 
T5-813B15 HOLDER FOR TORQUE TEST ON LAMPS WITH BAYONET CAPS (IEC 60968 F. 3, 60432-1 F. C.1) 
T5-814E27 HOLDER FOR TORQUE TEST ON LAMPS WITH SCREW CAPS (IEC 60432-1 F. C.2) 
T5-815E12 HOLDER FOR TORQUE TEST ON LAMPS WITH SCREW CAPS (IEC 60432-1 F. C.2) 
T5-816E17 HOLDER FOR TORQUE TEST ON LAMPS WITH SCREW CAPS (IEC 60432-1 F. C.2) 
T5-817CALIBRE C1 POUR 16A (NF C 61-314) 
T5-818CALIBRE C1 POUR 6A (NF C 61-314) 
T5-819CALIBRE C2 POUR 6A (NF C 61-314) 
T5-82E27 GAUGE FOR MINIMUM DISTANCE FROM OUTER END OF SCREW SHELL TO CENTRAL CONT. 
T5-820CALIBRE C2 POUR 16A (NF C 61-314) 
T5-821CALIBRE C3A POUR 6A (NF C 61-314) 
T5-822CALIBRE C3B POUR 6A (NF C 61-314) 
T5-823CALIBRE C3C POUR 6A (NF C 61-314) 
T5-824CALIBRE C3D POUR 16A (NF C 61-314) 
T5-825CALIBRE C3E POUR 16A (NF C 61-314) 
T5-826CALIBRE C3F POUR 16A (NF C 61-314) 
T5-827CALIBRE C4A POUR 6A, MASSE 300 g (NF C 61-314) 
T5-828CALIBRE C4A POUR 6A, MASSE 150 g (NF C 61-314) 
T5-829CALIBRE C4B POUR 16A, MASSE 400 g (NF C 61-314) 
T5-83E40 GAUGE FOR MINIMUM DISTANCE FROM OUTER END OF SCREW SHELL TO CENTRAL CONT. 
T5-830CALIBRE C4B POUR 16A, MASSE 200 g (NF C 61-314) 
T5-831CALIBRE C4C POUR 16A, MASSE 400 g (NF C 61-314) 
T5-832CALIBRE C4C POUR 16A, MASSE 200 g (NF C 61-314) 
T5-833CALIBRE C5 POUR 6A (NF C 61-314) 
T5-834CALIBRE C5 POUR 16A (NF C 61-314) 
T5-835CALIBRE C6 POUR 16A (NF C 61-314) 
T5-836CALIBRE C7A POUR 6A (NF C 61-314) 
T5-837CALIBRE C7A POUR 16A (NF C 61-314) 
T5-838CALIBRE C7B POUR 6A (NF C 61-314) 
T5-839CALIBRE C7B POUR 16A (NF C 61-314) 
T5-84E14 "NOT GO" PLUG GAUGE FOR SCREW THREADS OF LAMPHOLDERS (7006-26-4) 
T5-840"GO" GAUGE G FOR CHECKING KEY SLOTS IN LAMPHOLDERS G24,GX24 & GY24 (Sh.7006-78G-6, Fig. 1) 
T5-841"GO" GAUGE G FOR CHECKING KEY SLOTS IN LAMPHOLDERS G24,GX24 & GY24 (Sh.7006-78G-6, Fig. 2) 
T5-842"GO" GAUGE G FOR CHECKING KEY SLOTS IN LAMPHOLDERS G24,GX24 & GY24 (Sh.7006-78G-6, Fig. 3) 
T5-843"GO" GAUGE G FOR CHECKING KEY SLOTS IN LAMPHOLDERS G24,GX24 & GY24 (Sh.7006-78G-6, Fig. 4) 
T5-844"GO" GAUGE G FOR CHECKING KEY SLOTS IN LAMPHOLDERS G24,GX24 & GY24 (Sh.7006-78G-6, Fig. 5) 
T5-845"GO" GAUGE G FOR CHECKING KEY SLOTS IN LAMPHOLDERS G24,GX24 & GY24 (Sh.7006-78G-6, Fig. 6) 
T5-846"GO" GAUGE G FOR CHECKING KEY SLOTS IN LAMPHOLDERS G24,GX24 & GY24 (Sh.7006-78G-6, Fig. 7) 
T5-847"NOT GO" GAUGE FOR E26, E26/50x39, E26/51x39 & E26d CAPS ON FINISHED LAMPS (Sh. 7006-29L-4) 
T5-848"GO" AND "NOT GO" GAUGE FOR G23 BI-PIN CAPS ON FINISHED LAMPS (Sh. 7006-69-2) 
T5-849"GO" GAUGE FOR BI-PIN CAPS AND BASES G38 ON FINISHED LAMPS (Sh. 7006-76-1) 
T5-85E27 "NOT GO" PLUG GAUGE FOR SCREW THREADS OF LAMPHOLDERS (7006-26-4) 
T5-850"GO" AND "NOT GO" GAUGE FOR PINS OF BI-PIN CAPS AND BASES G38 ON FINISHED LAMPS (Sh. 7006-76A-1) 
T5-851"GO" GAUGE FOR E17 LAMPHOLDERS (Sh. 7006-25H-1) 
T5-852"NOT GO" GAUGE FOR E17 LAMPHOLDERS (Sh. 7006-26C-1) 
T5-853GAUGE FOR TESTING CONTACT MAKING IN E17 LAMPHOLDERS (Sh. 7006-26E-1) 
T5-854GAUGE FOR TESTING CONTACT MAKING IN E26 LAMPHOLDERS (Sh. 7006-25J-1) 
T5-855GAUGE FOR TESTING UNACCEPTABLE CONTACT MAKING IN E26d LAMPHOLDERS (Sh. 7006-29M-1) 
T5-856GAUGE FOR CHECKING MINIMUM RETENTION FORCE IN G9 LAMPHOLDERS (Sh. 7006-129C-1) 
T5-857GAUGE FOR CHECKING CONTACT-MAKING IN G9 LAMPHOLDERS (Sh. 7006-129D-1) 
T5-858GAUGE FOR CHECKING THE MINIMUM WITHDRAWAL TORQUE IN GU10 & GZ10 LAMPHOLDERS (Sh. 7006-120B-1) 
T5-859GAUGES FOR TESTING INSERTION AND CONTACT-MAKING IN LAMPHOLDERS 2G13-41 (Sh. 7006-33A-2) 
T5-86E40 "NOT GO" PLUG GAUGE FOR SCREW THREADS OF LAMPHOLDERS (7006-26-4) 
T5-860GAUGES FOR TESTING INSERTION AND CONTACT-MAKING IN LAMPHOLDERS 2G13-56 (Sh. 7006-33A-2) 
T5-861GAUGES FOR TESTING INSERTION AND CONTACT-MAKING IN LAMPHOLDERS 2G13-92 (Sh. 7006-33A-2) 
T5-862GAUGES FOR TESTING INSERTION AND CONTACT-MAKING IN LAMPHOLDERS 2G13-152 (Sh. 7006-33A-2) 
T5-863GAUGE FOR LAMPHOLDERS 2G13 FOR TESTING CONTACT-MAKING (Sh. 7006-33B-1) 
T5-864"GO" GAUGE FOR LAMPHOLDERS 2GX13 (Sh. 7006-125-1) 
T5-865GAUGE FOR TESTING CONTACT-MAKING IN 2GX13 LAMPHOLDERS (Sh. 7006-125C-1) 
T5-866GAUGE FOR CHECKING THE MINIMUM RETENTION FORCE OF 2GX13 LAMPHOLDERS (Sh. 7006-125D-1) 
T5-867GAUGE "A" FOR LAMPHOLDERS S14d (Sh. 7006-112D-1) 
T5-868GAUGE "B1" FOR LAMPHOLDERS S14d (Sh. 7006-112E-1) 
T5-869GAUGE "B2" FOR LAMPHOLDERS S14d (Sh. 7006-112E-1) 
T5-87E14 "GO" PLUG GAUGE FOR SCREW THREADS (7006-25-7) 
T5-870GAUGE "A" FOR LAMPHOLDERS S14s (Sh. 7006-112A-1) 
T5-871GAUGE "B" FOR LAMPHOLDERS S14s (Sh. 7006-112B-1) 
T5-872GAUGE "C" FOR LAMPHOLDERS S14s (Sh. 7006-112C-1) 
T5-873CONTACT GAUGE FOR CHECKING THE EARTHING CONTACT OF 2,5 A CONNECTORS (IEC 60320-1, F. 27) 
T5-874NO CONTACT GAUGE FOR CHECKING THE EARTHING CONTACT OF 2,5 A CONNECTORS (IEC 60320-1, F. 27) 
T5-875CONTACT GAUGE FOR CHECKING THE EARTHING CONTACT OF 16 A CONNECTORS (IEC 60320-1, F. 27) 
T5-876NO CONTACT GAUGE FOR CHECKING THE EARTHING CONTACT OF 16 A CONNECTORS (IEC 60320-1, F. 27) 
T5-877TEST PLUG WITH SOLID PINS FOR NORMAL OPERATION TEST (Cl. 18, BS 1363-2) 
T5-878SET OF SOLID PINS FOR T5-877 (3 pcs. Cl. 18, BS 1363-2) 
T5-879E10, EP10, EY10 "NOT GO" PLUG GAUGE FOR SCREW THREADS OF LAMPHOLDERS (7006-26-4) 
T5-88E27 "GO" GAUGE FOR LAMPHOLDERS (7006-25A-2) 
T5-880E39 "NOT GO" PLUG GAUGE FOR SCREW THREADS OF LAMPHOLDERS (7006-26-4) 
T5-881ACCEPTANCE GAUGE FOR B22d CAPS INTENDED FOR AUTOMATIC WIRE THREADING (7006-3-1) 
T5-882GAUGE BY22d FOR TESTING THE INSERTION OF CAPS IN LAMPHOLDERS (7006-4A-2) 
T5-883"GO" GAUGE FOR CAP B22d-3 (25x26) ON FINISHED LAMPS (7006-19-2) 
T5-89E40 "GO" PLUG GAUGE FOR SCREW THREADS (7006-25-7) 
T5-90E10 "GO" PLUG GAUGE FOR SCREW THREADS (7006-25-7) 
T5-91E10 "NOT GO" PLUG GAUGE FOR SCREW THREADS OF LAMPHOLDERS (7006-26-4) 
T5-92E40 GAUGE FOR TESTING PROTECTION AGAINST BULB-NECK DAMAGE AND FOR TESTING CONTACT-MAKING IN LAMPHOLDERS (7006-23-3) 
T5-95E40 PLUG GAUGE FOR LAMPHOLDERS FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT (7006-24-3) 
T5-XX GAUGES AND TEST PROBES t5_xx.jpg
T6-01VARIABLE RATIO TRANSFORMER (270 V, 30 A) 
T6-043-PHASE STABILIZED AC POWER SUPPLY UNIT 3 x 0-450V, 40A 
T6-073-PHASE AC POWER SUPPLY UNIT 3 x 0-550V, 45A 
T6-124 STEP DOUBLE PROGRAMMABLE TIMER 
T6-16PROGRAMMABLE OFF SWITCHING COUNTER 
T6-17OFF SWITCHING COUNTER WITH TIMER 
T6-19MOTOR CONTROLLER 200 
T6-20PNEUMATIC DRIVE UNIT 
T6-21SWITCH ACTUATOR CONTROL UNIT 
T6-21ASWITCH ACTUATOR (LONGITUDINAL MOVEMENT) 
T6-21BSWITCH ACTUATOR (LONGITUDINAL AND CIRCULAR MOVEMENT) 
T6-223-PHASE AC POWER SUPPY UNIT 3 x 0-520V, 20A (23 kVA) 
T6-46COORDINATE HOLDER 
T6-50RESISTANCE BATTERY 15 kW 
T6-60AIR CORE INDUCTOR 100 mH, 25 A 
T6-64AIR CORE INDUCTOR Imax 63 A, cosj max. 0.6 
T6-65IRON CORE INDUCTOR Imax 40 A, cosj max. 0.3 
T6-70TUNGSTEN LAMP LOAD (BATTERY WITH 60x200W LAMPS) 
T6-71BENCH FOR MECHANICAL TESTS 
T6-90 TEST SYSTEM FOR SWITCHES t6_90.jpg
T6-91TEST SYSTEM FOR SWITCHES (3 PHASE 3 x 34 kW, max. 440V, 91A, IEC 60669-1) 
T6-92POWER SUPPLY UNIT WITH NON INDUCTIVE RESISTANCE BATTERY (0-280 V, 15 A, 3,9 kVA, BS 1363-2 Cl. 17,18) 
T6-93POWER SUPPLY UNIT WITH INDUCTIVE AND RESISTIVE LOAD (0-275 V, 125 A, 0,3 cos ?) 
T6-94POWER SUPPLY UNIT WITH INDUCTIVE AND RESISTIVE LOAD (0-275 V, 50 A, 0,3 cos ?) 
TC150WBTEMPERATURE CHAMBER WITH WATER BATH FOR DETERMINATION OF FROST RESISTANCE OF NATURAL STONE 150l, (600 x 500 x 400 mm), -20°C to + 100 °C (EN 12371) 
TK265CTEMPERATURE CHAMBER 265 L, T= -40..50 deg C 
TK600CTEMPERATURE CHAMBER 612 L, T= -40..50 deg C 
TK600HTEMPERATURE CHAMBER 612 L, T= +35..+300 deg C
标题:
内容:
联系人:
联系电话:
Email:
公司名称:
联系地址:
 
 
注:1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!

Sitemap

百家乐线上网站| AG百家乐| 皇冠体育|